Water supply

Share with others

How to reach us

+44 (0) 1283 523000

Mon-Thr: 8.30am - 5.00pm

Fri: 8.00am - 4.30pm

Contact U

+44 (0) 1283 523000

Mon-Thr: 8.30am - 5.00pm

Fri: 8.00am - 4.30pm

Rainwater utilisation

Garden irrigation and cleaning outdoor areas — clever, inexpensive and environmentally friendly with rainwater.

Rainwater utilisation systems from Wilo pump water directly to the extraction points in the property. The wise utilisation of rainwater is clever, inexpensive and environmentally friendly.With specially designed systems from Wilo, about 50% of the daily water requirement can be covered using rainwater. This way, you can protect the environment and your household budget.

Inexpensive and environmentally-friendly: Put your trust in rainwater

Regenwasser

Use the valuable liquid that nature provides: With rainwater, you can irrigate your garden and clean your outdoor areas, like patios or garden paths - an inexpensive and environmentally-friendly alternative to using potable water.

A rainwater reservoir from Wilo uses natural resources

A rainwater reservoir in combination with a needs-based rainwater utilisation system ensures uniform, low-noise irrigation. Sprinkling, watering, irrigating and cleaning - where potable water is too expensive, rainwater utilisation is recommended, with a complete system from Wilo.

Regenwasser ist vielseitig einsetzbar

Did you know...

... that a four-person household in Germany can save up to 70,000 litres of potable water per year by using rainwater? The actual amount depends on the location and size of the usable roof area.

Rainwater is versatile

Rainwater can be used to flush toilets, wash clothes and irrigate gardens. There are also many utilisation options in industry and business.

 

 

Wilo-Economy COE-2 TWI 5
Economy COE-2 TWI 5

Design

Pressure boosting system with two parallel submersible pumps (suitable for installation outside water), vertical, non-self-priming, made of stainless steel, water-cooled and low-noise. Mounted on a base frame, with complete pipework including all hydraulic components, central switchgear, pressure switch and all cabling.

Application

Pressure boosting and water supply in residential applications and for small commercial installations where compact construction and a low noise level are necessary.

Special features / product benefits

Pressure boosting and water supply in residential applications and for small commercial installations where compact construction and a low noise level are necessary.

Technical data

  • Volume flow Qmax: 14 m3/h
  • Delivery head Hmax: 68m
  • Mains connection 3~400 V or 1~230 V ±10% 50 Hz
  • Fluid temperature max: +40°C
  • Operating pressure max: 10 bar
  • Nominal connection diameters G 2"
Wilo-EMHIL
EMHIL

Design

Non-self-priming water supply unit with frequency converter

Application

  • Water supply
  • Rainwater utilisation
  • Irrigation and spraying

Special features / product benefits

  • Water supply
  • Rainwater utilisation
  • Irrigation and spraying

Technical data

  • Maximum operating pressure: 10 bar
  • Max. fluid temperature: 40 °C
  • Min. fluid temperature:0 °C
  • Maximum ambient temperature: 50 °C
  • Mains connection: 1~230 V, 50/60 Hz
Wilo-HiPeri
HiPeri

Design

Non self-priming peripheral pump

Application

  • Water distribution/boosting
  • Raw water intake
  • Sprinkling and spraying
  • Rainwater utilisation

Special features / product benefits

  • Water distribution/boosting
  • Raw water intake
  • Sprinkling and spraying
  • Rainwater utilisation

Technical data

  • Max. fluid temperature: 60 °C
  • Ambient temperature: 40 °C
  • Max. operating pressure: 6.5 bar
  • Permanent or intermittent operation
  • Max. connections per hour: 20
  • Suction head: up to 8m
  • Insulation class: 155 (F)
  • Protection class: IPX4
  • Sound-pressure level: LpA < 70dBA
Wilo-Jet FWJ
Jet FWJ

Design

Self-priming water-supply units

Application

For pumping water and rainwater from wells and tanks for:

  • Sprinkling
  • Irrigation and spraying

Special features / product benefits

For pumping water and rainwater from wells and tanks for:

  • Sprinkling
  • Irrigation and spraying

Technical data

  • Mains connection 1~230 V, 50 Hz
  • Inlet pressure max. 1 bar
  • Switch-on pressure 1.5 bar to 2.7 bar
  • Switch-off pressure min. 2.2 bar
  • Fluid temperature +5 °C to +35 °C
  • Max. operating pressure 6 bar
  • Protection class IP 44
  • Pressure-side connection R 1
  • Suction-side connection G 1
Wilo-Jet HWJ
Jet HWJ

Design

Self-priming water-supply unit

Application

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Pumping water from wells and out of low-lying tanks

Special features / product benefits

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Pumping water from wells and out of low-lying tanks

Technical data

  • Mains connection 1~230 V, 50 Hz
  • Suction head max. 8 m
  • Inlet pressure max. 1 bar
  • Start-up pressure 1.5 bar
  • Variable switch-off pressure
  • Fluid temperature +5 °C to +35 °C
  • Max. operating pressure 6 bar
  • Protection class IP 44
  • Connection on pressure side Rp 1
  • Suction-side connection G 1
Wilo-Jet WJ
Jet WJ

Design

Self-priming multistage centrifugal pumps

Application

  • Pumping water from wells
  • Filling, pumping empty, transferring by pumping, irrigation and sprinkling
  • As emergency pump for overflows

Special features / product benefits

  • Pumping water from wells
  • Filling, pumping empty, transferring by pumping, irrigation and sprinkling
  • As emergency pump for overflows

Technical data

  • Mains connection 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Inlet pressure max 2 bar
  • Fluid temperature max. +5 °C to +35 °C
  • Max. operating pressure 6 bar
  • Protection class IP 44
  • Suction- and pressure-side connection G 1
Wilo-MultiCargo FMC
MultiCargo FMC

Design

Self-priming water-supply unit

Application

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Special features / product benefits

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Technical data

  • Mains connection 1~230 V, 50 Hz
  • Inlet pressure max. 1.5 bar
  • Switch-on pressure 1.5 bar to 2.7 bar
  • Switch-off pressure min. 2.2 bar
  • Fluid temperature +5 °C to +35 °C
  • Operating pressure max. 8 bar
  • Protection class IP 44
  • Pressure-side connection R 1
  • Suction-side connection Rp 1
Wilo-MultiCargo HMC
MultiCargo HMC

Design

Self-priming water-supply unit

Application

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Pumping water from wells and out of low-lying tanks

Special features / product benefits

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Pumping water from wells and out of low-lying tanks

Technical data

  • Mains connection 1~230 V, 50 Hz / 3~400 V, 50 Hz
  • Suction head max. 8 m
  • Inlet pressure max. 4 bar
  • Fluid temperature +5 °C to +35 °C
  • Operating pressure max. 8 bar
  • Pressure switch setting range 1-5 bar
  • Protection class IP 54
  • Suction- and pressure-side connection Rp 1
Wilo-MultiCargo MC
MultiCargo MC

Design

Self-priming multistage centrifugal pumps

Application

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Special features / product benefits

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Technical data

  • Mains connection 1~230 V, 50 Hz, 3~400 V, 50 Hz
  • Max. inlet pressure of 4 bar
  • Fluid temperature max. +5 °C to +35 °C
  • Max. ambient temperature of +40 °C
  • Max. operating pressure of 8 bar
  • Protection class 1~: IP X4; 3~: IP 54
  • Rp 1 connections on suction and pressure sides
Wilo-MultiPress FMP
MultiPress FMP

Design

Non-self-priming water-supply unit

Application

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Special features / product benefits

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Technical data

  • Mains connection 1~230 V, 50 Hz
  • Inlet pressure max. 1.5 bar
  • Switch-on pressure 1.5 bar to 2.7 bar
  • Switch-off pressure min. 2.2 bar
  • Fluid temperature +5 °C to +35 °C
  • Max. operating pressure 10 bar
  • Protection class IP 54
  • Pressure-side connection R 1
  • Suction-side connections Rp 1 for FMP3..; Rp 1¼ for FMP6..
Wilo-MultiPress HMP
MultiPress HMP

Design

Non-self-priming water-supply unit

Application

  • Water supply
  • Sprinkling
  • Irrigation and spraying

Special features / product benefits

  • Water supply
  • Sprinkling
  • Irrigation and spraying

Technical data

  • Mains connection 1~230 V, 50 Hz / 3~400 V, 50 Hz
  • Max. inlet pressure 6 bar
  • Fluid temperature +5 °C to +35 °C
  • Max. operating pressure 10 bar
  • Pressure switch setting range 1-5 bar
  • Protection class IP 54
  • Suction- and pressure-side connection Rp 1
Wilo-MultiPress MP
MultiPress MP

Design

Non-self-priming multistage centrifugal pumps

Application

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Special features / product benefits

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Technical data

  • Mains connection 1~230 V, 50 Hz, 3~400 V, 50 Hz
  • Max. inlet pressure of 6 bar
  • Fluid temperature max. +5 °C to +35 °C
  • Max. ambient temperature of +40 °C
  • Max. operating pressure of 10 bar
  • Protection class 1~: IP X4; 3~: IP 54
  • Pressure-side connections Rp 1
  • Suction-side connections: Rp 1 for MP3..; Rp 1¼ for MP6..
Wilo-RainSystem AF 150
RainSystem AF 150

Design

Automatic rainwater utilisation system with run-down tank and 2 self-priming pumps

Application

Rainwater utilisation in multi-family houses and small trade businesses for saving drinking water in conjunction with cisterns or tanks

Special features / product benefits

Rainwater utilisation in multi-family houses and small trade businesses for saving drinking water in conjunction with cisterns or tanks

Technical data

  • Suction head max. 8 m
  • Operating pressure max. 8 bar
  • Protection class: IP 41
  • Connections:

    • Pressure pipe/pressure-side joint tubing R 1 ½
    • Suction side 2 x 1/4G 1
    • Inlets R 1 ¼
    • Overflow connection DN 100

Wilo-RainSystem AF Basic
RainSystem AF Basic

Design

Ready-to-plug rainwater utilisation system

Application

Rainwater utilisation for saving drinking water in conjunction with cisterns or tanks

Special features / product benefits

Rainwater utilisation for saving drinking water in conjunction with cisterns or tanks

Technical data

  • Mains connection 1~230 V, 50 Hz
  • Suction head max. 8 m
  • Operating pressure max. 8 bar
  • Protection class IP 42
  • Connections:

    • Pressure pipe/pressure side Rp 1
    • Suction side R 1/ G 1
    • Drinking water replenishment R ¾
    • Connection overflow DN 70

Wilo-RainSystem AF Comfort
RainSystem AF Comfort

Design

Ready-to-plug rainwater utilisation system

Application

Rainwater utilisation for saving drinking water in conjunction with cisterns or tanks

Special features / product benefits

Rainwater utilisation for saving drinking water in conjunction with cisterns or tanks

Technical data

  • Mains connection 1~230 V, 50 Hz
  • Suction head max. 8 m
  • Operating pressure max. 8 bar
  • Protection class IP 42
  • Connections:

    • Pressure pipe/pressure side Rp 1
    • Suction side R 1/ G 1
    • Drinking water replenishment R ¾
    • Connection overflow DN 70

Wilo-Sub TWI 4
Sub TWI 4

Design

Multistage 4" submersible pump in tie strap version for vertical or horizontal installation

Application

<list type="bulleted">

  • For water and drinking water supply from boreholes and rainwater storage
  • Process water supply
  • For municipal water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water in industrial applications
  • For pumping water without long-fibre and abrasive constituents
  • Special features / product benefits

    <list type="bulleted">

  • For water and drinking water supply from boreholes and rainwater storage
  • Process water supply
  • For municipal water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water in industrial applications
  • For pumping water without long-fibre and abrasive constituents
  • Technical data

    • Minimum Efficiency Index (MEI) to ≥ 0.7
    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Submerged operating mode: S1
    • Fluid temperature: 3‐30 °C
    • Minimum flow rate at motor: 0.1 m/s
    • Max. sand content: 50 g/m3
    • Max. number of starts: 20/h
    • Max. submersion depth: 350 m
    • Protection class: IP 68
    • Pressure connection: Rp 1¼ - Rp 2
    Wilo-Sub TWI 5-SE Plug & Pump
    Sub TWI 5-SE Plug & Pump

    Design

    Water-supply system with submersible pump, control and complete accessories

    Application

    • Pumping from wells, rainwater storage tanks and vessels
    • Irrigation, sprinkling or pumping out
    • Water supply
    • Rainwater utilisation

    Special features / product benefits

    • Pumping from wells, rainwater storage tanks and vessels
    • Irrigation, sprinkling or pumping out
    • Water supply
    • Rainwater utilisation

    Technical data

    • Mains connection 1~230 V, 50 Hz
    • Fluid temperature +5 °C to +35 °C
    • Max. operating pressure 10 bar
    • Protection class: IP 68
    • Suction- and pressure-side connection Rp 1
    Wilo-Sub TWI 5/TWI 5-SE
    Sub TWI 5/TWI 5-SE

    Design

    5" submersible pump in stainless steel, multistage

    Application

    Submersible pumps

    • Pumping from wells, rainwater storage tanks and vessels
    • Irrigation, sprinkling and pumping out
    • Water supply
    • Rainwater utilisation

    Special features / product benefits

    Submersible pumps

    • Pumping from wells, rainwater storage tanks and vessels
    • Irrigation, sprinkling and pumping out
    • Water supply
    • Rainwater utilisation

    Technical data

    • Mains connection 1~230 V, 50 Hz / 3~400 V, 50 Hz
    • Fluid temperature max. +5 °C to +35 °C
    • Max. operating pressure 10 bar
    • Protection class IP 68
    • Pressure-side connection Rp 1¼
    • Connection on suction side for SE version Rp 1¼
    Wilo-Sub TWU 3
    Sub TWU 3

    Design

    Multistage 3" submersible pump in jacket design for vertical or horizontal installation

    Application

    <list type="bulleted">

  • For private water supply from boreholes, wells and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • For pumping water without long-fibre and abrasive constituents
  • Special features / product benefits

    <list type="bulleted">

  • For private water supply from boreholes, wells and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • For pumping water without long-fibre and abrasive constituents
  • Technical data

    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Immersed operating mode: S1
    • Fluid temperature: 3-35 °C
    • Minimum flow rate at motor: 0.08 m/s
    • Max. sand content: 50 g/m3
    • Max. number of starts: 30 /h
    • Max. immersion depth: 150 m
    • Protection class: IP 58
    • Pressure connection: Rp 1
    Wilo-Sub TWU 3 HS
    Sub TWU 3 HS

    Design

    Multistage, frequency controlled 3" submersible pump in jacket design for vertical or horizontal installation

    Application

    <list type="bulleted">

  • For private water supply from boreholes, wells and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • For pumping water without long-fibre and abrasive constituents
  • Special features / product benefits

    <list type="bulleted">

  • For private water supply from boreholes, wells and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • For pumping water without long-fibre and abrasive constituents
  • Technical data

    Submersible pump:

    • Supply voltage:
      HS-E…: 1~230 V, 50/60 Hz (connection to the AC mains supply by a frequency converter )
      HS-I…: 1~230 V, 50/60 Hz (direct connection to the AC mains supply)
    • Immersed operating mode: S1
    • Fluid temperature: 3-35 °C
    • Minimum flow rate at motor: 0.08 m/s
    • Max. sand content: 50 g/m3
    • Max. number of starts: 30 /h
    • Max. immersion depth: 150 m
    • Protection class: IP 58
    • Pressure connection: Rp 1

     

    Frequency converter for version "HS-E…“:

    • Mains connection: 1~230 V, 50/60 Hz
    • Output: 3~230 V/max.140 Hz/max.2.2 kW
    • Fluid temperature: 3-50 °C
    • Max. pressure: 8 bar
    • Protection class: IP X5
    • Connection: G 1¼
    Wilo-Sub TWU 3 Plug & Pump
    Sub TWU 3 Plug & Pump

    Design

    Water-supply unit with submersible-motor pump, control and complete accessories.

    Application

    Water-supply unit for

    <list type="bulleted">
  • Water supply from boreholes, wells and rainwater storage
  • Domestic water supply, sprinkling and irrigation
  • For pumping water without long-fibre and abrasive constituents
  • Special features / product benefits

    Water-supply unit for

    <list type="bulleted">
  • Water supply from boreholes, wells and rainwater storage
  • Domestic water supply, sprinkling and irrigation
  • For pumping water without long-fibre and abrasive constituents
  • Technical data

    • Mains connection: 1~230 V, 50 Hz
    • Immersed operating mode: S1
    • Fluid temperature: 3-35 °C
    • Minimum flow rate at motor: 0.08 m/s
    • Max. sand content: 50 g/m3
    • Max. number of starts: 30 /h
    • Max. immersion depth: 150 m
    • Protection class: IP 58
    • Pressure connection: Rp 1
    Wilo-Sub TWU 4
    Sub TWU 4

    Design

    Multistage 4" submersible pump in jacket design for vertical and horizontal installation

    Application

    <list type="bulleted">

  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents
  • Special features / product benefits

    <list type="bulleted">

  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents
  • Technical data

    • Minimum Efficiency Index (MEI) ≥ 0.7
    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Submerged operating mode: S1
    • Fluid temperature: 3‐30 °C
    • Minimum flow rate at motor: 0.08 m/s
    • Max. sand content: 50 g/m3
    • Max. number of starts: 20/h
    • Max. submersion depth: 200 m
    • Protection class: IP 68
    • Pressure connection: Rp 1¼ - Rp 2
    Wilo-Sub TWU 4 Plug & Pump
    Sub TWU 4 Plug & Pump

    Design

    Water-supply unit with submersible-motor pump, control and complete accessories.

    Application

    Water-supply unit for self-sufficient water supply in the domestic sector

    <list type="bulleted">
  • Washing machines
  • Garden sprinkling
  • Transferring by pumping and filling
  • Taps for process water
  • Special features / product benefits

    Water-supply unit for self-sufficient water supply in the domestic sector

    <list type="bulleted">
  • Washing machines
  • Garden sprinkling
  • Transferring by pumping and filling
  • Taps for process water
  • Technical data

    • Minimum Efficiency Index (MEI) ≥ 0.7
    • Mains connection: 1~230 V, 50 Hz
    • Submerged operating mode: S1
    • Fluid temperature: 3‐30 °C
    • Minimum flow rate at motor: 0.08 m/s
    • Max. sand content: 50 g/m3
    • Max. number of starts: 20/h
    • Max. submersion depth: 200 m
    • Protection class: IP 68
    • Pressure connection: Rp 1¼
    Wilo-Sub TWU 4-...-GT
    Sub TWU 4-...-GT

    Design

    Multistage 4" submersible pump in jacket design for vertical and horizontal installation

    Application

    <list type="bulleted">

  • Geothermal applications
  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents
  • Special features / product benefits

    <list type="bulleted">

  • Geothermal applications
  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents
  • Technical data

    • Minimum Efficiency Index (MEI) ≥ 0.7
    • Mains connection: 3~400 V, 50 Hz,
    • Submerged operating mode: S1
    • Fluid temperature: 3‐30 °C
    • Minimum flow rate at motor: 0.08 m/s
    • Max. sand content: 50 g/m3
    • Max. number of starts: 20/h
    • Max. submersion depth: 200 m
    • Protection class: IP 68
    • Pressure connection: Rp 1¼
    Wilo-Sub TWU 4-QC
    Sub TWU 4-QC

    Design

    Multistage 4" submersible pump in jacket design for vertical and horizontal installation

    Application

    <list type="bulleted">

  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents
  • Special features / product benefits

    <list type="bulleted">

  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents
  • Technical data

    • Minimum Efficiency Index (MEI) ≥ 0.7
    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Submerged operating mode: S1
    • Fluid temperature: 3‐30 °C
    • Minimum flow rate at motor: 0.08 m/s
    • Max. sand content: 50 g/m3
    • Max. number of starts: 20/h
    • Max. submersion depth: 200 m
    • Protection class: IP 68
    • Pressure connection: Rp 1¼ - Rp 2

    Everything good comes from above - cost savings through free water.

    Sprinkling, watering, irrigating and cleaning - where potable water is too expensive, rainwater utilisation is recommended, with a complete system from Wilo.

    Wilo-Economy COE-2 TWI 5
    Economy COE-2 TWI 5

    Design

    Pressure boosting system with two parallel submersible pumps (suitable for installation outside water), vertical, non-self-priming, made of stainless steel, water-cooled and low-noise. Mounted on a base frame, with complete pipework including all hydraulic components, central switchgear, pressure switch and all cabling.

    Application

    Pressure boosting and water supply in residential applications and for small commercial installations where compact construction and a low noise level are necessary.

    Special features / product benefits

    Pressure boosting and water supply in residential applications and for small commercial installations where compact construction and a low noise level are necessary.

    Technical data

    • Volume flow Qmax: 14 m3/h
    • Delivery head Hmax: 68m
    • Mains connection 3~400 V or 1~230 V ±10% 50 Hz
    • Fluid temperature max: +40°C
    • Operating pressure max: 10 bar
    • Nominal connection diameters G 2"
    Wilo-RainSystem AF 400
    RainSystem AF 400

    Design

    Automatic rainwater utilisation system with run-down tank and 2 non-self-priming pumps

    Application

    Commercial and industrial rainwater utilisation for conserving drinking water as a hybrid system in conjunction with rainwater storage tanks or vessels

    Special features / product benefits

    Commercial and industrial rainwater utilisation for conserving drinking water as a hybrid system in conjunction with rainwater storage tanks or vessels

    Technical data

    • Operating pressure max. 10 bar
    • Protection class: IP 54
    • Connections:

      • Pressure pipe/pressure-side joint tubing R 1 ½
      • Inflow pipe HT 50
      • Overflow connection DN 100

    Wilo-Economy COE-2 TWI 5
    Economy COE-2 TWI 5

    Design

    Pressure boosting system with two parallel submersible pumps (suitable for installation outside water), vertical, non-self-priming, made of stainless steel, water-cooled and low-noise. Mounted on a base frame, with complete pipework including all hydraulic components, central switchgear, pressure switch and all cabling.

    Application

    Pressure boosting and water supply in residential applications and for small commercial installations where compact construction and a low noise level are necessary.

    Special features / product benefits

    Pressure boosting and water supply in residential applications and for small commercial installations where compact construction and a low noise level are necessary.

    Technical data

    • Volume flow Qmax: 14 m3/h
    • Delivery head Hmax: 68m
    • Mains connection 3~400 V or 1~230 V ±10% 50 Hz
    • Fluid temperature max: +40°C
    • Operating pressure max: 10 bar
    • Nominal connection diameters G 2"
    Wilo-EMHIL
    EMHIL

    Design

    Non-self-priming water supply unit with frequency converter

    Application

    • Water supply
    • Rainwater utilisation
    • Irrigation and spraying

    Special features / product benefits

    • Water supply
    • Rainwater utilisation
    • Irrigation and spraying

    Technical data

    • Maximum operating pressure: 10 bar
    • Max. fluid temperature: 40 °C
    • Min. fluid temperature:0 °C
    • Maximum ambient temperature: 50 °C
    • Mains connection: 1~230 V, 50/60 Hz
    Wilo-HiPeri
    HiPeri

    Design

    Non self-priming peripheral pump

    Application

    • Water distribution/boosting
    • Raw water intake
    • Sprinkling and spraying
    • Rainwater utilisation

    Special features / product benefits

    • Water distribution/boosting
    • Raw water intake
    • Sprinkling and spraying
    • Rainwater utilisation

    Technical data

    • Max. fluid temperature: 60 °C
    • Ambient temperature: 40 °C
    • Max. operating pressure: 6.5 bar
    • Permanent or intermittent operation
    • Max. connections per hour: 20
    • Suction head: up to 8m
    • Insulation class: 155 (F)
    • Protection class: IPX4
    • Sound-pressure level: LpA < 70dBA
    Wilo-Jet FWJ
    Jet FWJ

    Design

    Self-priming water-supply units

    Application

    For pumping water and rainwater from wells and tanks for:

    • Sprinkling
    • Irrigation and spraying

    Special features / product benefits

    For pumping water and rainwater from wells and tanks for:

    • Sprinkling
    • Irrigation and spraying

    Technical data

    • Mains connection 1~230 V, 50 Hz
    • Inlet pressure max. 1 bar
    • Switch-on pressure 1.5 bar to 2.7 bar
    • Switch-off pressure min. 2.2 bar
    • Fluid temperature +5 °C to +35 °C
    • Max. operating pressure 6 bar
    • Protection class IP 44
    • Pressure-side connection R 1
    • Suction-side connection G 1
    Wilo-Jet HWJ
    Jet HWJ

    Design

    Self-priming water-supply unit

    Application

    • Water supply
    • Sprinkling
    • Irrigation and spraying
    • Pumping water from wells and out of low-lying tanks

    Special features / product benefits

    • Water supply
    • Sprinkling
    • Irrigation and spraying
    • Pumping water from wells and out of low-lying tanks

    Technical data

    • Mains connection 1~230 V, 50 Hz
    • Suction head max. 8 m
    • Inlet pressure max. 1 bar
    • Start-up pressure 1.5 bar
    • Variable switch-off pressure
    • Fluid temperature +5 °C to +35 °C
    • Max. operating pressure 6 bar
    • Protection class IP 44
    • Connection on pressure side Rp 1
    • Suction-side connection G 1
    Wilo-Jet WJ
    Jet WJ

    Design

    Self-priming multistage centrifugal pumps

    Application

    • Pumping water from wells
    • Filling, pumping empty, transferring by pumping, irrigation and sprinkling
    • As emergency pump for overflows

    Special features / product benefits

    • Pumping water from wells
    • Filling, pumping empty, transferring by pumping, irrigation and sprinkling
    • As emergency pump for overflows

    Technical data

    • Mains connection 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Inlet pressure max 2 bar
    • Fluid temperature max. +5 °C to +35 °C
    • Max. operating pressure 6 bar
    • Protection class IP 44
    • Suction- and pressure-side connection G 1
    Wilo-MultiCargo FMC
    MultiCargo FMC

    Design

    Self-priming water-supply unit

    Application

    • Water supply
    • Sprinkling
    • Irrigation and spraying
    • Rainwater utilisation

    Special features / product benefits

    • Water supply
    • Sprinkling
    • Irrigation and spraying
    • Rainwater utilisation

    Technical data

    • Mains connection 1~230 V, 50 Hz
    • Inlet pressure max. 1.5 bar
    • Switch-on pressure 1.5 bar to 2.7 bar
    • Switch-off pressure min. 2.2 bar
    • Fluid temperature +5 °C to +35 °C
    • Operating pressure max. 8 bar
    • Protection class IP 44
    • Pressure-side connection R 1
    • Suction-side connection Rp 1
    Wilo-MultiCargo HMC
    MultiCargo HMC

    Design

    Self-priming water-supply unit

    Application

    • Water supply
    • Sprinkling
    • Irrigation and spraying
    • Pumping water from wells and out of low-lying tanks

    Special features / product benefits

    • Water supply
    • Sprinkling
    • Irrigation and spraying
    • Pumping water from wells and out of low-lying tanks

    Technical data

    • Mains connection 1~230 V, 50 Hz / 3~400 V, 50 Hz
    • Suction head max. 8 m
    • Inlet pressure max. 4 bar
    • Fluid temperature +5 °C to +35 °C
    • Operating pressure max. 8 bar
    • Pressure switch setting range 1-5 bar
    • Protection class IP 54
    • Suction- and pressure-side connection Rp 1
    Wilo-MultiCargo MC
    MultiCargo MC

    Design

    Self-priming multistage centrifugal pumps

    Application

    • Water supply
    • Sprinkling
    • Irrigation and spraying
    • Rainwater utilisation

    Special features / product benefits

    • Water supply
    • Sprinkling
    • Irrigation and spraying
    • Rainwater utilisation

    Technical data

    • Mains connection 1~230 V, 50 Hz, 3~400 V, 50 Hz
    • Max. inlet pressure of 4 bar
    • Fluid temperature max. +5 °C to +35 °C
    • Max. ambient temperature of +40 °C
    • Max. operating pressure of 8 bar
    • Protection class 1~: IP X4; 3~: IP 54
    • Rp 1 connections on suction and pressure sides
    Wilo-MultiPress FMP
    MultiPress FMP

    Design

    Non-self-priming water-supply unit

    Application

    • Water supply
    • Sprinkling
    • Irrigation and spraying
    • Rainwater utilisation

    Special features / product benefits

    • Water supply
    • Sprinkling
    • Irrigation and spraying
    • Rainwater utilisation

    Technical data

    • Mains connection 1~230 V, 50 Hz
    • Inlet pressure max. 1.5 bar
    • Switch-on pressure 1.5 bar to 2.7 bar
    • Switch-off pressure min. 2.2 bar
    • Fluid temperature +5 °C to +35 °C
    • Max. operating pressure 10 bar
    • Protection class IP 54
    • Pressure-side connection R 1
    • Suction-side connections Rp 1 for FMP3..; Rp 1¼ for FMP6..
    Wilo-MultiPress HMP
    MultiPress HMP

    Design

    Non-self-priming water-supply unit

    Application

    • Water supply
    • Sprinkling
    • Irrigation and spraying

    Special features / product benefits

    • Water supply
    • Sprinkling
    • Irrigation and spraying

    Technical data

    • Mains connection 1~230 V, 50 Hz / 3~400 V, 50 Hz
    • Max. inlet pressure 6 bar
    • Fluid temperature +5 °C to +35 °C
    • Max. operating pressure 10 bar
    • Pressure switch setting range 1-5 bar
    • Protection class IP 54
    • Suction- and pressure-side connection Rp 1
    Wilo-MultiPress MP
    MultiPress MP

    Design

    Non-self-priming multistage centrifugal pumps

    Application

    • Water supply
    • Sprinkling
    • Irrigation and spraying
    • Rainwater utilisation

    Special features / product benefits

    • Water supply
    • Sprinkling
    • Irrigation and spraying
    • Rainwater utilisation

    Technical data

    • Mains connection 1~230 V, 50 Hz, 3~400 V, 50 Hz
    • Max. inlet pressure of 6 bar
    • Fluid temperature max. +5 °C to +35 °C
    • Max. ambient temperature of +40 °C
    • Max. operating pressure of 10 bar
    • Protection class 1~: IP X4; 3~: IP 54
    • Pressure-side connections Rp 1
    • Suction-side connections: Rp 1 for MP3..; Rp 1¼ for MP6..
    Wilo-RainSystem AF 150
    RainSystem AF 150

    Design

    Automatic rainwater utilisation system with run-down tank and 2 self-priming pumps

    Application

    Rainwater utilisation in multi-family houses and small trade businesses for saving drinking water in conjunction with cisterns or tanks

    Special features / product benefits

    Rainwater utilisation in multi-family houses and small trade businesses for saving drinking water in conjunction with cisterns or tanks

    Technical data

    • Suction head max. 8 m
    • Operating pressure max. 8 bar
    • Protection class: IP 41
    • Connections:

      • Pressure pipe/pressure-side joint tubing R 1 ½
      • Suction side 2 x 1/4G 1
      • Inlets R 1 ¼
      • Overflow connection DN 100

    Wilo-RainSystem AF 400
    RainSystem AF 400

    Design

    Automatic rainwater utilisation system with run-down tank and 2 non-self-priming pumps

    Application

    Commercial and industrial rainwater utilisation for conserving drinking water as a hybrid system in conjunction with rainwater storage tanks or vessels

    Special features / product benefits

    Commercial and industrial rainwater utilisation for conserving drinking water as a hybrid system in conjunction with rainwater storage tanks or vessels

    Technical data

    • Operating pressure max. 10 bar
    • Protection class: IP 54
    • Connections:

      • Pressure pipe/pressure-side joint tubing R 1 ½
      • Inflow pipe HT 50
      • Overflow connection DN 100

    Wilo-RainSystem AF Basic
    RainSystem AF Basic

    Design

    Ready-to-plug rainwater utilisation system

    Application

    Rainwater utilisation for saving drinking water in conjunction with cisterns or tanks

    Special features / product benefits

    Rainwater utilisation for saving drinking water in conjunction with cisterns or tanks

    Technical data

    • Mains connection 1~230 V, 50 Hz
    • Suction head max. 8 m
    • Operating pressure max. 8 bar
    • Protection class IP 42
    • Connections:

      • Pressure pipe/pressure side Rp 1
      • Suction side R 1/ G 1
      • Drinking water replenishment R ¾
      • Connection overflow DN 70

    Wilo-RainSystem AF Comfort
    RainSystem AF Comfort

    Design

    Ready-to-plug rainwater utilisation system

    Application

    Rainwater utilisation for saving drinking water in conjunction with cisterns or tanks

    Special features / product benefits

    Rainwater utilisation for saving drinking water in conjunction with cisterns or tanks

    Technical data

    • Mains connection 1~230 V, 50 Hz
    • Suction head max. 8 m
    • Operating pressure max. 8 bar
    • Protection class IP 42
    • Connections:

      • Pressure pipe/pressure side Rp 1
      • Suction side R 1/ G 1
      • Drinking water replenishment R ¾
      • Connection overflow DN 70

    Wilo-Sub TWI 4
    Sub TWI 4

    Design

    Multistage 4" submersible pump in tie strap version for vertical or horizontal installation

    Application

    <list type="bulleted">

  • For water and drinking water supply from boreholes and rainwater storage
  • Process water supply
  • For municipal water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water in industrial applications
  • For pumping water without long-fibre and abrasive constituents
  • Special features / product benefits

    <list type="bulleted">

  • For water and drinking water supply from boreholes and rainwater storage
  • Process water supply
  • For municipal water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water in industrial applications
  • For pumping water without long-fibre and abrasive constituents
  • Technical data

    • Minimum Efficiency Index (MEI) to ≥ 0.7
    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Submerged operating mode: S1
    • Fluid temperature: 3‐30 °C
    • Minimum flow rate at motor: 0.1 m/s
    • Max. sand content: 50 g/m3
    • Max. number of starts: 20/h
    • Max. submersion depth: 350 m
    • Protection class: IP 68
    • Pressure connection: Rp 1¼ - Rp 2
    Wilo-Sub TWI 5-SE Plug & Pump
    Sub TWI 5-SE Plug & Pump

    Design

    Water-supply system with submersible pump, control and complete accessories

    Application

    • Pumping from wells, rainwater storage tanks and vessels
    • Irrigation, sprinkling or pumping out
    • Water supply
    • Rainwater utilisation

    Special features / product benefits

    • Pumping from wells, rainwater storage tanks and vessels
    • Irrigation, sprinkling or pumping out
    • Water supply
    • Rainwater utilisation

    Technical data

    • Mains connection 1~230 V, 50 Hz
    • Fluid temperature +5 °C to +35 °C
    • Max. operating pressure 10 bar
    • Protection class: IP 68
    • Suction- and pressure-side connection Rp 1
    Wilo-Sub TWI 5/TWI 5-SE
    Sub TWI 5/TWI 5-SE

    Design

    5" submersible pump in stainless steel, multistage

    Application

    Submersible pumps

    • Pumping from wells, rainwater storage tanks and vessels
    • Irrigation, sprinkling and pumping out
    • Water supply
    • Rainwater utilisation

    Special features / product benefits

    Submersible pumps

    • Pumping from wells, rainwater storage tanks and vessels
    • Irrigation, sprinkling and pumping out
    • Water supply
    • Rainwater utilisation

    Technical data

    • Mains connection 1~230 V, 50 Hz / 3~400 V, 50 Hz
    • Fluid temperature max. +5 °C to +35 °C
    • Max. operating pressure 10 bar
    • Protection class IP 68
    • Pressure-side connection Rp 1¼
    • Connection on suction side for SE version Rp 1¼
    Wilo-Sub TWU 3
    Sub TWU 3

    Design

    Multistage 3" submersible pump in jacket design for vertical or horizontal installation

    Application

    <list type="bulleted">

  • For private water supply from boreholes, wells and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • For pumping water without long-fibre and abrasive constituents
  • Special features / product benefits

    <list type="bulleted">

  • For private water supply from boreholes, wells and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • For pumping water without long-fibre and abrasive constituents
  • Technical data

    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Immersed operating mode: S1
    • Fluid temperature: 3-35 °C
    • Minimum flow rate at motor: 0.08 m/s
    • Max. sand content: 50 g/m3
    • Max. number of starts: 30 /h
    • Max. immersion depth: 150 m
    • Protection class: IP 58
    • Pressure connection: Rp 1
    Wilo-Sub TWU 3 HS
    Sub TWU 3 HS

    Design

    Multistage, frequency controlled 3" submersible pump in jacket design for vertical or horizontal installation

    Application

    <list type="bulleted">

  • For private water supply from boreholes, wells and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • For pumping water without long-fibre and abrasive constituents
  • Special features / product benefits

    <list type="bulleted">

  • For private water supply from boreholes, wells and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • For pumping water without long-fibre and abrasive constituents
  • Technical data

    Submersible pump:

    • Supply voltage:
      HS-E…: 1~230 V, 50/60 Hz (connection to the AC mains supply by a frequency converter )
      HS-I…: 1~230 V, 50/60 Hz (direct connection to the AC mains supply)
    • Immersed operating mode: S1
    • Fluid temperature: 3-35 °C
    • Minimum flow rate at motor: 0.08 m/s
    • Max. sand content: 50 g/m3
    • Max. number of starts: 30 /h
    • Max. immersion depth: 150 m
    • Protection class: IP 58
    • Pressure connection: Rp 1

     

    Frequency converter for version "HS-E…“:

    • Mains connection: 1~230 V, 50/60 Hz
    • Output: 3~230 V/max.140 Hz/max.2.2 kW
    • Fluid temperature: 3-50 °C
    • Max. pressure: 8 bar
    • Protection class: IP X5
    • Connection: G 1¼
    Wilo-Sub TWU 3 Plug & Pump
    Sub TWU 3 Plug & Pump

    Design

    Water-supply unit with submersible-motor pump, control and complete accessories.

    Application

    Water-supply unit for

    <list type="bulleted">
  • Water supply from boreholes, wells and rainwater storage
  • Domestic water supply, sprinkling and irrigation
  • For pumping water without long-fibre and abrasive constituents
  • Special features / product benefits

    Water-supply unit for

    <list type="bulleted">
  • Water supply from boreholes, wells and rainwater storage
  • Domestic water supply, sprinkling and irrigation
  • For pumping water without long-fibre and abrasive constituents
  • Technical data

    • Mains connection: 1~230 V, 50 Hz
    • Immersed operating mode: S1
    • Fluid temperature: 3-35 °C
    • Minimum flow rate at motor: 0.08 m/s
    • Max. sand content: 50 g/m3
    • Max. number of starts: 30 /h
    • Max. immersion depth: 150 m
    • Protection class: IP 58
    • Pressure connection: Rp 1
    Wilo-Sub TWU 4
    Sub TWU 4

    Design

    Multistage 4" submersible pump in jacket design for vertical and horizontal installation

    Application

    <list type="bulleted">

  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents
  • Special features / product benefits

    <list type="bulleted">

  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents
  • Technical data

    • Minimum Efficiency Index (MEI) ≥ 0.7
    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Submerged operating mode: S1
    • Fluid temperature: 3‐30 °C
    • Minimum flow rate at motor: 0.08 m/s
    • Max. sand content: 50 g/m3
    • Max. number of starts: 20/h
    • Max. submersion depth: 200 m
    • Protection class: IP 68
    • Pressure connection: Rp 1¼ - Rp 2
    Wilo-Sub TWU 4 Plug & Pump
    Sub TWU 4 Plug & Pump

    Design

    Water-supply unit with submersible-motor pump, control and complete accessories.

    Application

    Water-supply unit for self-sufficient water supply in the domestic sector

    <list type="bulleted">
  • Washing machines
  • Garden sprinkling
  • Transferring by pumping and filling
  • Taps for process water
  • Special features / product benefits

    Water-supply unit for self-sufficient water supply in the domestic sector

    <list type="bulleted">
  • Washing machines
  • Garden sprinkling
  • Transferring by pumping and filling
  • Taps for process water
  • Technical data

    • Minimum Efficiency Index (MEI) ≥ 0.7
    • Mains connection: 1~230 V, 50 Hz
    • Submerged operating mode: S1
    • Fluid temperature: 3‐30 °C
    • Minimum flow rate at motor: 0.08 m/s
    • Max. sand content: 50 g/m3
    • Max. number of starts: 20/h
    • Max. submersion depth: 200 m
    • Protection class: IP 68
    • Pressure connection: Rp 1¼
    Wilo-Sub TWU 4-...-GT
    Sub TWU 4-...-GT

    Design

    Multistage 4" submersible pump in jacket design for vertical and horizontal installation

    Application

    <list type="bulleted">

  • Geothermal applications
  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents
  • Special features / product benefits

    <list type="bulleted">

  • Geothermal applications
  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents
  • Technical data

    • Minimum Efficiency Index (MEI) ≥ 0.7
    • Mains connection: 3~400 V, 50 Hz,
    • Submerged operating mode: S1
    • Fluid temperature: 3‐30 °C
    • Minimum flow rate at motor: 0.08 m/s
    • Max. sand content: 50 g/m3
    • Max. number of starts: 20/h
    • Max. submersion depth: 200 m
    • Protection class: IP 68
    • Pressure connection: Rp 1¼
    Wilo-Sub TWU 4-QC
    Sub TWU 4-QC

    Design

    Multistage 4" submersible pump in jacket design for vertical and horizontal installation

    Application

    <list type="bulleted">

  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents
  • Special features / product benefits

    <list type="bulleted">

  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents
  • Technical data

    • Minimum Efficiency Index (MEI) ≥ 0.7
    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Submerged operating mode: S1
    • Fluid temperature: 3‐30 °C
    • Minimum flow rate at motor: 0.08 m/s
    • Max. sand content: 50 g/m3
    • Max. number of starts: 20/h
    • Max. submersion depth: 200 m
    • Protection class: IP 68
    • Pressure connection: Rp 1¼ - Rp 2
    Share with others

    Customer Service

    For all sales and technical queries

    Contact us to discuss any technical assistance you may require together with stock availability, service and training requirements. E-mail sales@wilo.co.uk .

    T +44 (0) 1283 523000

    F +44 (0) 1283 523099

    Rainwater utilisation

    Pioneering for You