Drainage and sewage

Share with others

How to reach us

+44 (0) 1283 523000

Mon-Thr: 8.30am - 5.00pm

Fri: 8.00am - 4.30pm

Contact U

+44 (0) 1283 523000

Mon-Thr: 8.30am - 5.00pm

Fri: 8.00am - 4.30pm

Dewatering (incl. flood control)

Wilo-Drain LP
Drain LP

Design

Self-priming drainage pump with standard motor for dry well installation

Application

Pumping of wastewater for

  • Ponds
  • Sprinkling / spraying of gardens and green areas
  • Mobile drainage

Special features / product benefits

Pumping of

  • Wastewater
  • Process water

Technical data

  • Mains connection: 1~230 V, 50 Hz
  • Protection class: 44
  • Fluid temperature: 3 ‐ 35 °C
  • Free ball passage: 5 mm
  • Connection: Rp 1½
  • Max. suction head: 6 m
Wilo-Drain LPC
Drain LPC

Design

Self-priming drainage pump with standard motor for dry well installation

Application

Pumping of wastewater with small amounts of solid matter for

  • Excavation pits and ponds
  • Sprinkling / spraying of gardens and green areas
  • Dewatering of seepage water
  • Mobile drainage

Special features / product benefits

Pumping of

  • Wastewater
  • Process water

Technical data

  • Mains connection: 3~400 V, 50 Hz
  • Protection class: IP 55
  • Fluid temperature: 3 - 80 °C
  • Free ball passage: 6 - 12 mm (depending on type)
  • Pressure port: R 1½ / Rp 2 or Rp 3
  • Max. suction head: 7.5 m
Wilo-Drain STS 40
Drain STS 40

Design

Submersible sewage pump for intermittent operation for stationary and portable wet well installation.

Application

Pumping of

<list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Technical data

    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Immersed operating mode: S1 or S3 25%
    • Protection class: IP 68
    • Insulation class: B
    • Thermal winding monitoring
    • Max. fluid temperature: 3 ‐ 35 °C
    • Cable length: 10 m
    • Free ball passage: 40 mm
    • Max. immersion depth: 5 m
    Wilo-Drain TC 40
    Drain TC 40

    Design

    Submersible sewage pump for intermittent operation for stationary and portable wet well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Technical data

    • Mains connection: 1~230 V, 50 Hz
    • Immersed operating mode: S1 or S3 25%
    • Surfaced operating mode: S3 25%
    • Protection class: IP 68
    • Insulation class: F
    • Thermal winding monitoring
    • Max. fluid temperature: 3 ‐ 40 °C
    • Cable length: 5 m
    • Free ball passage: 40 mm
    • Max. immersion depth: 5 m
    Wilo-Drain TM/TMW/TMR 32
    Drain TM/TMW/TMR 32

    Design

    Submersible drainage pump

    Application

    • For pumping clear or slightly muddy water

      • From tanks, sumps or pits
      • For overflows and flooding
      • For draining basement stairways and basement areas

     

    TMR

    The TMR is suited for lowering the water level to a remaining level of 2 mm.

    TMW

    The service life of submersible pumps, which are used in pump sumps and through which washing machine water, soapy water from basins and showers, or other mixtures flow, is considerably reduced by settling sediment. Such sediment can form deposits in the pump sump, resulting in the accumulation of mud and odours.

    Wilo-Drain TMW 32 has a turbulator that prevents the build-up of sediment, expelling it together with the fluid. This reduces costs and the time needed for regular cleaning of the sump. In addition, problems associated with mud removal and the observance of occupational safety hygiene regulations during cleaning of the pump sump are minimized.

    Special features / product benefits

    Pumping of

    • Pre-cleaned sewage without faeces and long-fibre components
    • Wastewater

    Technical data

    • Mains connection 1~230 V, 50 Hz
    • Protection class: IP 68
    • Submersion depth max. 3 m
    • Fluid temperature 3 ‐ 35 °C, max. 90 °C for short periods up to 3 min.
    • Cable length 3 to 10 m, depending on type
    • Free ball passage 10 mm (TMR: 2 mm)
    • Pressure port Rp 1 ¼
    Wilo-Drain TS 40-65
    Drain TS 40-65

    Design

    Submersible drainage pump

    Application

    Pumping of

    • Pre-cleaned sewage without faeces and long-fibre components
    • Wastewater

    Special features / product benefits

    Pumping of

    • Pre-cleaned sewage without faeces and long-fibre components
    • Wastewater

    Technical data

    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Protection class: IP 68
    • Max. immersion depth:TS 40 = 5 m; TS 50/TS 65 = 10 m
    • Fluid temperature: 3 ‐ 35 °C
    • Cable length: 10 m
    • Free ball passage: 10 mm
    • Pressure port: TS 40 = Rp 1, TS 50 = Rp 1¼, TS 65 = Rp 2½
    Wilo-Drain TS/TSW 32
    Drain TS/TSW 32

    Design

    Submersible drainage pump

    Application

    • For pumping clear or slightly muddy water

      • From tanks, sumps or pits
      • For overflows and flooding
      • For draining basement stairways and basement areas

    • From domestic areas (washing machine water, soapsuds)
    • From small fountains, waterworks or streams

     

    TSW

    The service life of submersible pumps, which are used in pump sumps and through which washing machine water, soapy water from basins and showers, or other mixtures flow, is considerably reduced by settling sediment. Such sediment can form deposits in the pump sump, resulting in the accumulation of mud and odours.

    Wilo-Drain TSW 32 has a turbulator that prevents the build-up of sediment, expelling it together with the fluid. This reduces costs and the time needed for regular cleaning of the sump. In addition, problems associated with mud removal and the observance of occupational safety hygiene regulations during cleaning of the pump sump are minimised.

    Special features / product benefits

    Pumping of

    • Pre-cleaned sewage without faeces and long-fibre components
    • Wastewater

    Technical data

    • Mains connection 1~230 V, 50 Hz
    • Protection class IP 68
    • Max. immersion depth 10 m
    • Fluid temperature 3 - 35 °C, for short periods up to 3 min. max. 90 °C
    • Cable length 10 m
    • Free ball passage 10 mm
    • Rp 1 ¼ pressure port, hose connection Ø 32 mm, R1
    Wilo-Drain STS 40
    Drain STS 40

    Design

    Submersible sewage pump for intermittent operation for stationary and portable wet well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Technical data

    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Immersed operating mode: S1 or S3 25%
    • Protection class: IP 68
    • Insulation class: B
    • Thermal winding monitoring
    • Max. fluid temperature: 3 ‐ 35 °C
    • Cable length: 10 m
    • Free ball passage: 40 mm
    • Max. immersion depth: 5 m
    Wilo-Drain TC 40
    Drain TC 40

    Design

    Submersible sewage pump for intermittent operation for stationary and portable wet well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Technical data

    • Mains connection: 1~230 V, 50 Hz
    • Immersed operating mode: S1 or S3 25%
    • Surfaced operating mode: S3 25%
    • Protection class: IP 68
    • Insulation class: F
    • Thermal winding monitoring
    • Max. fluid temperature: 3 ‐ 40 °C
    • Cable length: 5 m
    • Free ball passage: 40 mm
    • Max. immersion depth: 5 m
    Wilo-Drain TP 50/TP 65
    Drain TP 50/TP 65

    Design

    Submersible sewage pump for continuous duty for stationary and portable wet well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Technical data

    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Immersed operating mode: S1
    • Non-immersed operating mode: S2-8 min, S3 25%
    • Protection class: IP 68
    • Insulation class: F
    • Thermal winding monitoring
    • Max. fluid temperature: 3 ‐ 35°C
    • Cable length: 10 m
    • Free ball passage: 44 mm
    • Max. immersion depth: 10 m
    Wilo-Drain TP 80/TP 100
    Drain TP 80/TP 100

    Design

    Submersible sewage pump for continuous duty for stationary and portable wet well installation, as well as stationary dry well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Process water
  • Wastewater
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Process water
  • Wastewater
  • Technical data

    • Mains connection: 3~400 V, 50 Hz
    • Immersed and non-immersed operating modes: S1
    • Protection class: IP 68
    • Insulation class: F
    • Max. fluid temperature: 3 ‐ 40°C
    • Free ball passage: 80 or 95 mm
    • Max. immersion depth: 20 m
    Wilo-Drain VC
    Drain VC

    Design

    Non-submersible pedestal pump with standard motor

    Application

    Pumping of wastewater:

    • Containing solid substances of max. Ø 5 mm or Ø 7 mm (VC 40)
    • Fluids up to 95 °C
    • From pump sumps
    • With condensate
    • From basements at risk of flooding

    Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Wastewater
  • Industrial wastewater with a maximum fluid temperature of 95 °C.
  • Technical data

    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Protection class: IP 54
    • Fluid temperature: 3 ‐ 95 °C
    • Free ball passage: 5 mm / 7 mm
    • Pressure port: R 1 / R 1½
    Wilo-EMU FA (standard variant)
    EMU FA (standard variant)

    Design

    Submersible sewage pump without cooling system for continuous duty for stationary and portable wet well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Technical data

    • Mains connection: 3~400 V, 50 Hz
    • Immersed operating mode: S1
    • Surfaced operating mode: S1, S2-15 or S2-30 (depending on type)
    • Thermal motor monitoring
    • Protection class: IP 68
    • Insulation class: F
    • Fluid temperature: 3 ‐ 40 °C
    • Cable length: 10 m
    • Free ball passage from 45 mm to 100 mm
    • Permanently lubricated roller bearings
    • Max. immersion depth: 20 m
    Wilo-EMU KS
    EMU KS

    Design

    Submersible drainage pump

    Application

    Pumping of

    • Wastewater

    Special features / product benefits

    Pumping of

    • Wastewater

    Technical data

    • Mains connection: 1~230  V, 50 Hz or 3~400 V, 50 Hz
    • Protection class: IP 68
    • Max. submersion depth: 12.5 m
    • Fluid temperature: 3…40 °C
    • Cable length: 10 m/20 m
    • Free ball passage: 5…45 mm (depending on type)
    • Pressure port: G 1¼, G 2, G 2½, G 3, G 4 (depending on type)
    Wilo-Drain LP
    Drain LP

    Design

    Self-priming drainage pump with standard motor for dry well installation

    Application

    Pumping of wastewater for

    • Ponds
    • Sprinkling / spraying of gardens and green areas
    • Mobile drainage

    Special features / product benefits

    Pumping of

    • Wastewater
    • Process water

    Technical data

    • Mains connection: 1~230 V, 50 Hz
    • Protection class: 44
    • Fluid temperature: 3 ‐ 35 °C
    • Free ball passage: 5 mm
    • Connection: Rp 1½
    • Max. suction head: 6 m
    Wilo-Drain LPC
    Drain LPC

    Design

    Self-priming drainage pump with standard motor for dry well installation

    Application

    Pumping of wastewater with small amounts of solid matter for

    • Excavation pits and ponds
    • Sprinkling / spraying of gardens and green areas
    • Dewatering of seepage water
    • Mobile drainage

    Special features / product benefits

    Pumping of

    • Wastewater
    • Process water

    Technical data

    • Mains connection: 3~400 V, 50 Hz
    • Protection class: IP 55
    • Fluid temperature: 3 - 80 °C
    • Free ball passage: 6 - 12 mm (depending on type)
    • Pressure port: R 1½ / Rp 2 or Rp 3
    • Max. suction head: 7.5 m
    Wilo-Drain STS 40
    Drain STS 40

    Design

    Submersible sewage pump for intermittent operation for stationary and portable wet well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Technical data

    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Immersed operating mode: S1 or S3 25%
    • Protection class: IP 68
    • Insulation class: B
    • Thermal winding monitoring
    • Max. fluid temperature: 3 ‐ 35 °C
    • Cable length: 10 m
    • Free ball passage: 40 mm
    • Max. immersion depth: 5 m
    Wilo-Drain TC 40
    Drain TC 40

    Design

    Submersible sewage pump for intermittent operation for stationary and portable wet well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Technical data

    • Mains connection: 1~230 V, 50 Hz
    • Immersed operating mode: S1 or S3 25%
    • Surfaced operating mode: S3 25%
    • Protection class: IP 68
    • Insulation class: F
    • Thermal winding monitoring
    • Max. fluid temperature: 3 ‐ 40 °C
    • Cable length: 5 m
    • Free ball passage: 40 mm
    • Max. immersion depth: 5 m
    Wilo-Drain TM/TMW/TMR 32
    Drain TM/TMW/TMR 32

    Design

    Submersible drainage pump

    Application

    • For pumping clear or slightly muddy water

      • From tanks, sumps or pits
      • For overflows and flooding
      • For draining basement stairways and basement areas

     

    TMR

    The TMR is suited for lowering the water level to a remaining level of 2 mm.

    TMW

    The service life of submersible pumps, which are used in pump sumps and through which washing machine water, soapy water from basins and showers, or other mixtures flow, is considerably reduced by settling sediment. Such sediment can form deposits in the pump sump, resulting in the accumulation of mud and odours.

    Wilo-Drain TMW 32 has a turbulator that prevents the build-up of sediment, expelling it together with the fluid. This reduces costs and the time needed for regular cleaning of the sump. In addition, problems associated with mud removal and the observance of occupational safety hygiene regulations during cleaning of the pump sump are minimized.

    Special features / product benefits

    Pumping of

    • Pre-cleaned sewage without faeces and long-fibre components
    • Wastewater

    Technical data

    • Mains connection 1~230 V, 50 Hz
    • Protection class: IP 68
    • Submersion depth max. 3 m
    • Fluid temperature 3 ‐ 35 °C, max. 90 °C for short periods up to 3 min.
    • Cable length 3 to 10 m, depending on type
    • Free ball passage 10 mm (TMR: 2 mm)
    • Pressure port Rp 1 ¼
    Wilo-Drain TP 50/TP 65
    Drain TP 50/TP 65

    Design

    Submersible sewage pump for continuous duty for stationary and portable wet well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Technical data

    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Immersed operating mode: S1
    • Non-immersed operating mode: S2-8 min, S3 25%
    • Protection class: IP 68
    • Insulation class: F
    • Thermal winding monitoring
    • Max. fluid temperature: 3 ‐ 35°C
    • Cable length: 10 m
    • Free ball passage: 44 mm
    • Max. immersion depth: 10 m
    Wilo-Drain TP 80/TP 100
    Drain TP 80/TP 100

    Design

    Submersible sewage pump for continuous duty for stationary and portable wet well installation, as well as stationary dry well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Process water
  • Wastewater
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Process water
  • Wastewater
  • Technical data

    • Mains connection: 3~400 V, 50 Hz
    • Immersed and non-immersed operating modes: S1
    • Protection class: IP 68
    • Insulation class: F
    • Max. fluid temperature: 3 ‐ 40°C
    • Free ball passage: 80 or 95 mm
    • Max. immersion depth: 20 m
    Wilo-Drain TS 40-65
    Drain TS 40-65

    Design

    Submersible drainage pump

    Application

    Pumping of

    • Pre-cleaned sewage without faeces and long-fibre components
    • Wastewater

    Special features / product benefits

    Pumping of

    • Pre-cleaned sewage without faeces and long-fibre components
    • Wastewater

    Technical data

    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Protection class: IP 68
    • Max. immersion depth:TS 40 = 5 m; TS 50/TS 65 = 10 m
    • Fluid temperature: 3 ‐ 35 °C
    • Cable length: 10 m
    • Free ball passage: 10 mm
    • Pressure port: TS 40 = Rp 1, TS 50 = Rp 1¼, TS 65 = Rp 2½
    Wilo-Drain TS/TSW 32
    Drain TS/TSW 32

    Design

    Submersible drainage pump

    Application

    • For pumping clear or slightly muddy water

      • From tanks, sumps or pits
      • For overflows and flooding
      • For draining basement stairways and basement areas

    • From domestic areas (washing machine water, soapsuds)
    • From small fountains, waterworks or streams

     

    TSW

    The service life of submersible pumps, which are used in pump sumps and through which washing machine water, soapy water from basins and showers, or other mixtures flow, is considerably reduced by settling sediment. Such sediment can form deposits in the pump sump, resulting in the accumulation of mud and odours.

    Wilo-Drain TSW 32 has a turbulator that prevents the build-up of sediment, expelling it together with the fluid. This reduces costs and the time needed for regular cleaning of the sump. In addition, problems associated with mud removal and the observance of occupational safety hygiene regulations during cleaning of the pump sump are minimised.

    Special features / product benefits

    Pumping of

    • Pre-cleaned sewage without faeces and long-fibre components
    • Wastewater

    Technical data

    • Mains connection 1~230 V, 50 Hz
    • Protection class IP 68
    • Max. immersion depth 10 m
    • Fluid temperature 3 - 35 °C, for short periods up to 3 min. max. 90 °C
    • Cable length 10 m
    • Free ball passage 10 mm
    • Rp 1 ¼ pressure port, hose connection Ø 32 mm, R1
    Wilo-Drain VC
    Drain VC

    Design

    Non-submersible pedestal pump with standard motor

    Application

    Pumping of wastewater:

    • Containing solid substances of max. Ø 5 mm or Ø 7 mm (VC 40)
    • Fluids up to 95 °C
    • From pump sumps
    • With condensate
    • From basements at risk of flooding

    Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Wastewater
  • Industrial wastewater with a maximum fluid temperature of 95 °C.
  • Technical data

    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Protection class: IP 54
    • Fluid temperature: 3 ‐ 95 °C
    • Free ball passage: 5 mm / 7 mm
    • Pressure port: R 1 / R 1½
    Wilo-EMU FA (standard variant)
    EMU FA (standard variant)

    Design

    Submersible sewage pump without cooling system for continuous duty for stationary and portable wet well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Technical data

    • Mains connection: 3~400 V, 50 Hz
    • Immersed operating mode: S1
    • Surfaced operating mode: S1, S2-15 or S2-30 (depending on type)
    • Thermal motor monitoring
    • Protection class: IP 68
    • Insulation class: F
    • Fluid temperature: 3 ‐ 40 °C
    • Cable length: 10 m
    • Free ball passage from 45 mm to 100 mm
    • Permanently lubricated roller bearings
    • Max. immersion depth: 20 m
    Wilo-EMU FA…T
    EMU FA…T

    Design

    Submersible sewage pump with and without active cooling system for pumping untreated sewage for continuous duty in the stationary and portable wet well installation, as well as for stationary dry well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Untreated sewage with faeces and long-fibre components
  • Sewage containing faeces
  • Process water
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Untreated sewage with faeces and long-fibre components
  • Sewage containing faeces
  • Process water
  • Technical data

    • Mains connection: 3~400 V, 50 Hz
    • Immersed operating mode: S1
    • Surfaced operating mode with self-cooling motor: S1
    • Non-immersed operating mode with glanded motor: S2-15 min (depending on type)
    • Protection class: IP 68
    • Fluid temperature: 3 ‐ 40°C; higher temperatures on request
    • Sealing: With rotary shaft seal and mechanical seal, two mechanical seals or one block seal cartridge, depending on the motor
    • Free passage: 78x105 - 150x150 mm.
    • Permanently lubricated roller bearings
    • Max. immersion depth: 20 m
    Wilo-EMU KPR
    EMU KPR

    Design

    Axial pump submersible without cooling system for continuous duty in pipe chambers in the stationary wet well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Pre-cleaned sewage without faeces and long-fibre components
  • Process water
  • Wastewater
  • Process water
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Pre-cleaned sewage without faeces and long-fibre components
  • Process water
  • Wastewater
  • Process water
  • Technical data

    • Mains connection: 3~400 V, 50 Hz
    • Immersed operating mode: S1
    • Protection class: IP 68
    • Max. fluid temperature: 3 ‐ 40°C, higher temperatures on request
    • Sealing: With two mechanical seals or one block seal cartridge, depending on the motor
    • Free ball passage: 85 - 130 mm.
    • Short common pump/motor shaft
    • Permanently lubricated roller bearings
    • Max. immersion depth: 20 m
    Wilo-EMU KS
    EMU KS

    Design

    Submersible drainage pump

    Application

    Pumping of

    • Wastewater

    Special features / product benefits

    Pumping of

    • Wastewater

    Technical data

    • Mains connection: 1~230  V, 50 Hz or 3~400 V, 50 Hz
    • Protection class: IP 68
    • Max. submersion depth: 12.5 m
    • Fluid temperature: 3…40 °C
    • Cable length: 10 m/20 m
    • Free ball passage: 5…45 mm (depending on type)
    • Pressure port: G 1¼, G 2, G 2½, G 3, G 4 (depending on type)
    Wilo-EMU polder pumps
    EMU polder pumps

    Design

    Multistage submersible pump as polder pump for vertical installation

    Application

    <list type="bulleted">

  • Potable and process water from tanks or shallow bodies of water
  • Municipal water supply
  • Sprinkling and irrigation
  • Lowering the water level
  • Industrial applications
  • Utilisation of geothermal energy
  • Utilisation in offshore areas
  • Special features / product benefits

    <list type="bulleted">

  • Potable and process water from tanks or shallow bodies of water
  • Municipal water supply
  • Sprinkling and irrigation
  • Lowering the water level
  • Industrial applications
  • Utilisation of geothermal energy
  • Utilisation in offshore areas
  • Technical data

    • Mains connection: 3~400 V, 50 Hz
    • Fluid temperature: 20 °C, higher temperatures on request
    • Minimum flow across outside shroud: not necessary
    • Max. sand content: 35 g/m3
    • Max. number of starts: 10/h
    • Protection class: IP 68
    • Control range for frequency converters:

      • 2-pole: 25-50 Hz
      • 4-pole: 30-50 Hz

    Wilo-Rexa FIT
    Rexa FIT

    Design

    Submersible sewage pump for intermittent operation for stationary and portable wet well installation, as well as for the stationary dry well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Technical data

    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Immersed operating mode: S1
    • Non-immersed operating mode: S2-15 min; S3 10%
    • Protection class: IP 68
    • Insulation class: F
    • Fluid temperature: 3 - 40°C, max. 60°C for 3 min
    • Free passage: 50 / 65 / 80 mm
    • Max. immersion depth: 20 m
    • Cable length: 10 m
    Wilo-Rexa PRO
    Rexa PRO

    Design

    Submersible sewage pump for continuous duty for stationary and portable wet well installation, as well as for stationary dry well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Technical data

    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Immersed operating mode: S1
    • Non-immersed operating mode: S2‑30 min; S3 25%
    • Protection class: IP 68
    • Insulation class: F
    • Fluid temperature: 3 - 40°C, max. 60°C for 3 min
    • Free passage: 50 / 65 / 80 mm
    • Max. immersion depth: 20 m
    • Cable length: 10 m
    Wilo-Sevio ACT
    Sevio ACT

    Design

    Solids diffuser

    Application

    Gentle mixing process of biomass carrier particles of all types in the pumped fluid

    Special features / product benefits

    Gentle mixing process of biomass carrier particles of all types in the pumped fluid

    Technical data

    • Volume flow rate: 3300…4000 m³/h
    • Max. basin depth: 3...8 m
    • Layer thickness of biomass particles: 1.6...5.5 m
    • Percent by volume of biomass particles: 40…70 %
    • Mains connection: 3~400 V, 50 Hz,
    • Immersed operating mode: S1
    • Protection class: IP 68
    • Max. fluid temperature: 40 °C
    Wilo-Sevio AIR
    Sevio AIR

    Design

    Aeration system with tube, panel or disc diffusers

    Application

    For large to fine-bubble aeration of aqueous media such as water, sewage or sludge, for the purpose of supplying oxygen and intermixing.

    Special features / product benefits

    For large to fine-bubble aeration of aqueous media such as water, sewage or sludge, for the purpose of supplying oxygen and intermixing.

    Technical data

    Disc aerator

    • Outer diameter: 280 mm
    • Diaphragm diameter: 237 mm
    • Diaphragm surface area: 0.044 m²
    • Oxygen utilisation: 6.5…8.5 %/m
    • Size of the air bubbles: 1-3 mm
    • Pressure loss: 22…43 mbar
    • Connection size: 90 mm for plastic pipework, 88.9 mm for stainless steel pipework
    • Max. air temperature in the system/disc aerator: 100 °C

    Loading range*

    • Air volume range: 1-8 Nm³/h
    • Min. loading: 1.5 Nm³/h
    • Standard loading: 4.0 Nm³/h
    • Max. loading: 6.0 Nm³/h
    • A loading of 7.5 Nm³/h is possible for short periods (max. 15 minutes)

    *The values for loading apply under standard conditions: 0 °C and 1013 hPa.

    Wilo-Sevio MIX DM
    Sevio MIX DM

    Design

    Submersible mixer for MUD applications

    Application

    For pumping drilling mud in offshore and on-shore installations

    Special features / product benefits

    For pumping drilling mud in offshore and on-shore installations

    Technical data

    • Mains connection: 3~400 V, 50 Hz,
    • Immersed operating mode: S1
    • Protection class: IP 68
    • Max. fluid temperature: 90 °C
    • Gear: Single-stage planetary gear
    • Max. immersion depth: 20 m
    Wilo-Sevio MIX/FLOW BG
    Sevio MIX/FLOW BG

    Design

    Submersible mixer for biogas applications with 1- and 2-stage planetary gear

    Application

    Submersible mixers for use in biogas plants for mixing substrates in fermenters and secondary fermentation tanks.

    Special features / product benefits

    Submersible mixers for use in biogas plants for mixing substrates in fermenters and secondary fermentation tanks.

    Technical data

    • Mains connection: 3~400 V, 50 Hz,
    • Submerged operating mode: S1
    • Protection class: IP 68
    • Max. fluid temperature: 60 °C
    • Gear: 1-stage (Sevio MIX) or 2-stage (Sevio FLOW) planetary gear
    • Max. submersion depth: 20 m
    Wilo-Drain TP 80/TP 100
    Drain TP 80/TP 100

    Design

    Submersible sewage pump for continuous duty for stationary and portable wet well installation, as well as stationary dry well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Process water
  • Wastewater
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Process water
  • Wastewater
  • Technical data

    • Mains connection: 3~400 V, 50 Hz
    • Immersed and non-immersed operating modes: S1
    • Protection class: IP 68
    • Insulation class: F
    • Max. fluid temperature: 3 ‐ 40°C
    • Free ball passage: 80 or 95 mm
    • Max. immersion depth: 20 m
    Wilo-Drain VC
    Drain VC

    Design

    Non-submersible pedestal pump with standard motor

    Application

    Pumping of wastewater:

    • Containing solid substances of max. Ø 5 mm or Ø 7 mm (VC 40)
    • Fluids up to 95 °C
    • From pump sumps
    • With condensate
    • From basements at risk of flooding

    Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Wastewater
  • Industrial wastewater with a maximum fluid temperature of 95 °C.
  • Technical data

    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Protection class: IP 54
    • Fluid temperature: 3 ‐ 95 °C
    • Free ball passage: 5 mm / 7 mm
    • Pressure port: R 1 / R 1½
    Wilo-EMU KS
    EMU KS

    Design

    Submersible drainage pump

    Application

    Pumping of

    • Wastewater

    Special features / product benefits

    Pumping of

    • Wastewater

    Technical data

    • Mains connection: 1~230  V, 50 Hz or 3~400 V, 50 Hz
    • Protection class: IP 68
    • Max. submersion depth: 12.5 m
    • Fluid temperature: 3…40 °C
    • Cable length: 10 m/20 m
    • Free ball passage: 5…45 mm (depending on type)
    • Pressure port: G 1¼, G 2, G 2½, G 3, G 4 (depending on type)
    Wilo-EMU polder pumps
    EMU polder pumps

    Design

    Multistage submersible pump as polder pump for vertical installation

    Application

    <list type="bulleted">

  • Potable and process water from tanks or shallow bodies of water
  • Municipal water supply
  • Sprinkling and irrigation
  • Lowering the water level
  • Industrial applications
  • Utilisation of geothermal energy
  • Utilisation in offshore areas
  • Special features / product benefits

    <list type="bulleted">

  • Potable and process water from tanks or shallow bodies of water
  • Municipal water supply
  • Sprinkling and irrigation
  • Lowering the water level
  • Industrial applications
  • Utilisation of geothermal energy
  • Utilisation in offshore areas
  • Technical data

    • Mains connection: 3~400 V, 50 Hz
    • Fluid temperature: 20 °C, higher temperatures on request
    • Minimum flow across outside shroud: not necessary
    • Max. sand content: 35 g/m3
    • Max. number of starts: 10/h
    • Protection class: IP 68
    • Control range for frequency converters:

      • 2-pole: 25-50 Hz
      • 4-pole: 30-50 Hz

    Wilo-Drain LP
    Drain LP

    Design

    Self-priming drainage pump with standard motor for dry well installation

    Application

    Pumping of wastewater for

    • Ponds
    • Sprinkling / spraying of gardens and green areas
    • Mobile drainage

    Special features / product benefits

    Pumping of

    • Wastewater
    • Process water

    Technical data

    • Mains connection: 1~230 V, 50 Hz
    • Protection class: 44
    • Fluid temperature: 3 ‐ 35 °C
    • Free ball passage: 5 mm
    • Connection: Rp 1½
    • Max. suction head: 6 m
    Wilo-Drain LPC
    Drain LPC

    Design

    Self-priming drainage pump with standard motor for dry well installation

    Application

    Pumping of wastewater with small amounts of solid matter for

    • Excavation pits and ponds
    • Sprinkling / spraying of gardens and green areas
    • Dewatering of seepage water
    • Mobile drainage

    Special features / product benefits

    Pumping of

    • Wastewater
    • Process water

    Technical data

    • Mains connection: 3~400 V, 50 Hz
    • Protection class: IP 55
    • Fluid temperature: 3 - 80 °C
    • Free ball passage: 6 - 12 mm (depending on type)
    • Pressure port: R 1½ / Rp 2 or Rp 3
    • Max. suction head: 7.5 m
    Wilo-Drain STS 40
    Drain STS 40

    Design

    Submersible sewage pump for intermittent operation for stationary and portable wet well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Technical data

    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Immersed operating mode: S1 or S3 25%
    • Protection class: IP 68
    • Insulation class: B
    • Thermal winding monitoring
    • Max. fluid temperature: 3 ‐ 35 °C
    • Cable length: 10 m
    • Free ball passage: 40 mm
    • Max. immersion depth: 5 m
    Wilo-Drain TC 40
    Drain TC 40

    Design

    Submersible sewage pump for intermittent operation for stationary and portable wet well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Technical data

    • Mains connection: 1~230 V, 50 Hz
    • Immersed operating mode: S1 or S3 25%
    • Surfaced operating mode: S3 25%
    • Protection class: IP 68
    • Insulation class: F
    • Thermal winding monitoring
    • Max. fluid temperature: 3 ‐ 40 °C
    • Cable length: 5 m
    • Free ball passage: 40 mm
    • Max. immersion depth: 5 m
    Wilo-Drain TM/TMW/TMR 32
    Drain TM/TMW/TMR 32

    Design

    Submersible drainage pump

    Application

    • For pumping clear or slightly muddy water

      • From tanks, sumps or pits
      • For overflows and flooding
      • For draining basement stairways and basement areas

     

    TMR

    The TMR is suited for lowering the water level to a remaining level of 2 mm.

    TMW

    The service life of submersible pumps, which are used in pump sumps and through which washing machine water, soapy water from basins and showers, or other mixtures flow, is considerably reduced by settling sediment. Such sediment can form deposits in the pump sump, resulting in the accumulation of mud and odours.

    Wilo-Drain TMW 32 has a turbulator that prevents the build-up of sediment, expelling it together with the fluid. This reduces costs and the time needed for regular cleaning of the sump. In addition, problems associated with mud removal and the observance of occupational safety hygiene regulations during cleaning of the pump sump are minimized.

    Special features / product benefits

    Pumping of

    • Pre-cleaned sewage without faeces and long-fibre components
    • Wastewater

    Technical data

    • Mains connection 1~230 V, 50 Hz
    • Protection class: IP 68
    • Submersion depth max. 3 m
    • Fluid temperature 3 ‐ 35 °C, max. 90 °C for short periods up to 3 min.
    • Cable length 3 to 10 m, depending on type
    • Free ball passage 10 mm (TMR: 2 mm)
    • Pressure port Rp 1 ¼
    Wilo-Drain TP 50/TP 65
    Drain TP 50/TP 65

    Design

    Submersible sewage pump for continuous duty for stationary and portable wet well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Technical data

    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Immersed operating mode: S1
    • Non-immersed operating mode: S2-8 min, S3 25%
    • Protection class: IP 68
    • Insulation class: F
    • Thermal winding monitoring
    • Max. fluid temperature: 3 ‐ 35°C
    • Cable length: 10 m
    • Free ball passage: 44 mm
    • Max. immersion depth: 10 m
    Wilo-Drain TP 80/TP 100
    Drain TP 80/TP 100

    Design

    Submersible sewage pump for continuous duty for stationary and portable wet well installation, as well as stationary dry well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Process water
  • Wastewater
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Process water
  • Wastewater
  • Technical data

    • Mains connection: 3~400 V, 50 Hz
    • Immersed and non-immersed operating modes: S1
    • Protection class: IP 68
    • Insulation class: F
    • Max. fluid temperature: 3 ‐ 40°C
    • Free ball passage: 80 or 95 mm
    • Max. immersion depth: 20 m
    Wilo-Drain TS 40-65
    Drain TS 40-65

    Design

    Submersible drainage pump

    Application

    Pumping of

    • Pre-cleaned sewage without faeces and long-fibre components
    • Wastewater

    Special features / product benefits

    Pumping of

    • Pre-cleaned sewage without faeces and long-fibre components
    • Wastewater

    Technical data

    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Protection class: IP 68
    • Max. immersion depth:TS 40 = 5 m; TS 50/TS 65 = 10 m
    • Fluid temperature: 3 ‐ 35 °C
    • Cable length: 10 m
    • Free ball passage: 10 mm
    • Pressure port: TS 40 = Rp 1, TS 50 = Rp 1¼, TS 65 = Rp 2½
    Wilo-Drain TS/TSW 32
    Drain TS/TSW 32

    Design

    Submersible drainage pump

    Application

    • For pumping clear or slightly muddy water

      • From tanks, sumps or pits
      • For overflows and flooding
      • For draining basement stairways and basement areas

    • From domestic areas (washing machine water, soapsuds)
    • From small fountains, waterworks or streams

     

    TSW

    The service life of submersible pumps, which are used in pump sumps and through which washing machine water, soapy water from basins and showers, or other mixtures flow, is considerably reduced by settling sediment. Such sediment can form deposits in the pump sump, resulting in the accumulation of mud and odours.

    Wilo-Drain TSW 32 has a turbulator that prevents the build-up of sediment, expelling it together with the fluid. This reduces costs and the time needed for regular cleaning of the sump. In addition, problems associated with mud removal and the observance of occupational safety hygiene regulations during cleaning of the pump sump are minimised.

    Special features / product benefits

    Pumping of

    • Pre-cleaned sewage without faeces and long-fibre components
    • Wastewater

    Technical data

    • Mains connection 1~230 V, 50 Hz
    • Protection class IP 68
    • Max. immersion depth 10 m
    • Fluid temperature 3 - 35 °C, for short periods up to 3 min. max. 90 °C
    • Cable length 10 m
    • Free ball passage 10 mm
    • Rp 1 ¼ pressure port, hose connection Ø 32 mm, R1
    Wilo-Drain VC
    Drain VC

    Design

    Non-submersible pedestal pump with standard motor

    Application

    Pumping of wastewater:

    • Containing solid substances of max. Ø 5 mm or Ø 7 mm (VC 40)
    • Fluids up to 95 °C
    • From pump sumps
    • With condensate
    • From basements at risk of flooding

    Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Wastewater
  • Industrial wastewater with a maximum fluid temperature of 95 °C.
  • Technical data

    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Protection class: IP 54
    • Fluid temperature: 3 ‐ 95 °C
    • Free ball passage: 5 mm / 7 mm
    • Pressure port: R 1 / R 1½
    Wilo-EMU FA (standard variant)
    EMU FA (standard variant)

    Design

    Submersible sewage pump without cooling system for continuous duty for stationary and portable wet well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Technical data

    • Mains connection: 3~400 V, 50 Hz
    • Immersed operating mode: S1
    • Surfaced operating mode: S1, S2-15 or S2-30 (depending on type)
    • Thermal motor monitoring
    • Protection class: IP 68
    • Insulation class: F
    • Fluid temperature: 3 ‐ 40 °C
    • Cable length: 10 m
    • Free ball passage from 45 mm to 100 mm
    • Permanently lubricated roller bearings
    • Max. immersion depth: 20 m
    Wilo-EMU FA…T
    EMU FA…T

    Design

    Submersible sewage pump with and without active cooling system for pumping untreated sewage for continuous duty in the stationary and portable wet well installation, as well as for stationary dry well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Untreated sewage with faeces and long-fibre components
  • Sewage containing faeces
  • Process water
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Untreated sewage with faeces and long-fibre components
  • Sewage containing faeces
  • Process water
  • Technical data

    • Mains connection: 3~400 V, 50 Hz
    • Immersed operating mode: S1
    • Surfaced operating mode with self-cooling motor: S1
    • Non-immersed operating mode with glanded motor: S2-15 min (depending on type)
    • Protection class: IP 68
    • Fluid temperature: 3 ‐ 40°C; higher temperatures on request
    • Sealing: With rotary shaft seal and mechanical seal, two mechanical seals or one block seal cartridge, depending on the motor
    • Free passage: 78x105 - 150x150 mm.
    • Permanently lubricated roller bearings
    • Max. immersion depth: 20 m
    Wilo-EMU KPR
    EMU KPR

    Design

    Axial pump submersible without cooling system for continuous duty in pipe chambers in the stationary wet well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Pre-cleaned sewage without faeces and long-fibre components
  • Process water
  • Wastewater
  • Process water
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Pre-cleaned sewage without faeces and long-fibre components
  • Process water
  • Wastewater
  • Process water
  • Technical data

    • Mains connection: 3~400 V, 50 Hz
    • Immersed operating mode: S1
    • Protection class: IP 68
    • Max. fluid temperature: 3 ‐ 40°C, higher temperatures on request
    • Sealing: With two mechanical seals or one block seal cartridge, depending on the motor
    • Free ball passage: 85 - 130 mm.
    • Short common pump/motor shaft
    • Permanently lubricated roller bearings
    • Max. immersion depth: 20 m
    Wilo-EMU KS
    EMU KS

    Design

    Submersible drainage pump

    Application

    Pumping of

    • Wastewater

    Special features / product benefits

    Pumping of

    • Wastewater

    Technical data

    • Mains connection: 1~230  V, 50 Hz or 3~400 V, 50 Hz
    • Protection class: IP 68
    • Max. submersion depth: 12.5 m
    • Fluid temperature: 3…40 °C
    • Cable length: 10 m/20 m
    • Free ball passage: 5…45 mm (depending on type)
    • Pressure port: G 1¼, G 2, G 2½, G 3, G 4 (depending on type)
    Wilo-EMU polder pumps
    EMU polder pumps

    Design

    Multistage submersible pump as polder pump for vertical installation

    Application

    <list type="bulleted">

  • Potable and process water from tanks or shallow bodies of water
  • Municipal water supply
  • Sprinkling and irrigation
  • Lowering the water level
  • Industrial applications
  • Utilisation of geothermal energy
  • Utilisation in offshore areas
  • Special features / product benefits

    <list type="bulleted">

  • Potable and process water from tanks or shallow bodies of water
  • Municipal water supply
  • Sprinkling and irrigation
  • Lowering the water level
  • Industrial applications
  • Utilisation of geothermal energy
  • Utilisation in offshore areas
  • Technical data

    • Mains connection: 3~400 V, 50 Hz
    • Fluid temperature: 20 °C, higher temperatures on request
    • Minimum flow across outside shroud: not necessary
    • Max. sand content: 35 g/m3
    • Max. number of starts: 10/h
    • Protection class: IP 68
    • Control range for frequency converters:

      • 2-pole: 25-50 Hz
      • 4-pole: 30-50 Hz

    Wilo-Rexa FIT
    Rexa FIT

    Design

    Submersible sewage pump for intermittent operation for stationary and portable wet well installation, as well as for the stationary dry well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Technical data

    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Immersed operating mode: S1
    • Non-immersed operating mode: S2-15 min; S3 10%
    • Protection class: IP 68
    • Insulation class: F
    • Fluid temperature: 3 - 40°C, max. 60°C for 3 min
    • Free passage: 50 / 65 / 80 mm
    • Max. immersion depth: 20 m
    • Cable length: 10 m
    Wilo-Rexa PRO
    Rexa PRO

    Design

    Submersible sewage pump for continuous duty for stationary and portable wet well installation, as well as for stationary dry well installation.

    Application

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Special features / product benefits

    Pumping of

    <list type="bulleted">
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
  • Technical data

    • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
    • Immersed operating mode: S1
    • Non-immersed operating mode: S2‑30 min; S3 25%
    • Protection class: IP 68
    • Insulation class: F
    • Fluid temperature: 3 - 40°C, max. 60°C for 3 min
    • Free passage: 50 / 65 / 80 mm
    • Max. immersion depth: 20 m
    • Cable length: 10 m
    Wilo-Sevio ACT
    Sevio ACT

    Design

    Solids diffuser

    Application

    Gentle mixing process of biomass carrier particles of all types in the pumped fluid

    Special features / product benefits

    Gentle mixing process of biomass carrier particles of all types in the pumped fluid

    Technical data

    • Volume flow rate: 3300…4000 m³/h
    • Max. basin depth: 3...8 m
    • Layer thickness of biomass particles: 1.6...5.5 m
    • Percent by volume of biomass particles: 40…70 %
    • Mains connection: 3~400 V, 50 Hz,
    • Immersed operating mode: S1
    • Protection class: IP 68
    • Max. fluid temperature: 40 °C
    Wilo-Sevio AIR
    Sevio AIR

    Design

    Aeration system with tube, panel or disc diffusers

    Application

    For large to fine-bubble aeration of aqueous media such as water, sewage or sludge, for the purpose of supplying oxygen and intermixing.

    Special features / product benefits

    For large to fine-bubble aeration of aqueous media such as water, sewage or sludge, for the purpose of supplying oxygen and intermixing.

    Technical data

    Disc aerator

    • Outer diameter: 280 mm
    • Diaphragm diameter: 237 mm
    • Diaphragm surface area: 0.044 m²
    • Oxygen utilisation: 6.5…8.5 %/m
    • Size of the air bubbles: 1-3 mm
    • Pressure loss: 22…43 mbar
    • Connection size: 90 mm for plastic pipework, 88.9 mm for stainless steel pipework
    • Max. air temperature in the system/disc aerator: 100 °C

    Loading range*

    • Air volume range: 1-8 Nm³/h
    • Min. loading: 1.5 Nm³/h
    • Standard loading: 4.0 Nm³/h
    • Max. loading: 6.0 Nm³/h
    • A loading of 7.5 Nm³/h is possible for short periods (max. 15 minutes)

    *The values for loading apply under standard conditions: 0 °C and 1013 hPa.

    Wilo-Sevio MIX DM
    Sevio MIX DM

    Design

    Submersible mixer for MUD applications

    Application

    For pumping drilling mud in offshore and on-shore installations

    Special features / product benefits

    For pumping drilling mud in offshore and on-shore installations

    Technical data

    • Mains connection: 3~400 V, 50 Hz,
    • Immersed operating mode: S1
    • Protection class: IP 68
    • Max. fluid temperature: 90 °C
    • Gear: Single-stage planetary gear
    • Max. immersion depth: 20 m
    Wilo-Sevio MIX/FLOW BG
    Sevio MIX/FLOW BG

    Design

    Submersible mixer for biogas applications with 1- and 2-stage planetary gear

    Application

    Submersible mixers for use in biogas plants for mixing substrates in fermenters and secondary fermentation tanks.

    Special features / product benefits

    Submersible mixers for use in biogas plants for mixing substrates in fermenters and secondary fermentation tanks.

    Technical data

    • Mains connection: 3~400 V, 50 Hz,
    • Submerged operating mode: S1
    • Protection class: IP 68
    • Max. fluid temperature: 60 °C
    • Gear: 1-stage (Sevio MIX) or 2-stage (Sevio FLOW) planetary gear
    • Max. submersion depth: 20 m
    Share with others

    We would be happy to help you.

    Contact us!

    Do you have questions, a problem or require information? With just one phone call we can provide you with help and advice. Find the right contact person quickly.

    T +44 (0) 1283 523000

    F +44 (0) 1283 523099

    Dewatering (incl. flood control)

    Pioneering for You