Homepage | Products | Wilo series A-Z | Wilo-Drain MTC
 Search »
Wilo-Drain MTC

Submersible wastewater pumps with macerator

Pumping of sewage containing faeces, as well as municipal and industrial sewage with long-fibre constituents, from individual buildings and for commercial utilisation. The macerator breaks down the solid constituents into smaller pieces to generate a readily pumpable medium.
Special features/Product advantages
  • Oil isolation chamber
  • High efficiency
  • SiC mechanical seal on pump side
  • Longitudinal watertight cable
  • Version witht Ex protection (optional MTC 32)
Wilo-Drain MTC
Technical data

  • Mains connection 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Protection class IP 68
  • Fluid temperature dependent on type max. 35 or 40 °C
  • Cable length 10 m
Equipment
  • Submersible sewage pump as submersible monobloc unit with macerator for vertical wet sump installation
  • Free inlet towards the impeller
  • Cuts up the fluid
  • Detachable connection cable
  • Attached float switch (MTC 40, version A)
Description/Design
Monobloc submersible waste water pump with macerator for vertical wet sump installation; three-phase asynchronous motor 3~400 V, 50 Hz or single-phase AC motor 1~230 V, 50 Hz, protection class IP 68, protected by thermal winding contacts, insulation class F; motor shaft mounted in permanently lubricated, low maintenance roller bearings
  • Shaft sealing: mechanical seal on motor side which is independent of direction of rotation (exception MTC 32 F 39.10: sealing on motor side with 2 radial shaft seal rings), mechanical seal on pump side which is independent of direction of rotation; oil-filled intermediate chamber serves as cooling and lubrication
  • Hydraulics: open multi-channel impeller (MTC 40 Vortex impeller) in conjunction with macerator allows clogging-free pumping and optimum efficiency
Materials
  • Pump housing: EN-GJL-250
  • Impeller: EN-GJL-200
  • Shaft: 1.0503 (MTC 40, 1.4034)
  • Mechanical seal on pump side (dependent on direction of rotation): SiC/SiC
  • Mechanical seal on motor side: Carbon/ceramic bzw. Al/SiC (MTC 40)
  • Radial shaft seal ring on motor side: NBR (MTC 32 F 39.10)
  • Static seal: NBR
  • Motor housing: EN-GJL-250
  • Macerator: 1.4112 (MTC 40, 1.3544)
Scope of delivery
  • Connection-ready pump with 10 m connection cable
    • For 3~400 V with bare cable end
    • For 1~230 V with attached float switch and shock-proof plug
  • Installation and operating instructions
Wilo-Drain MTC
Dynamic name Discharge size 1-phase / 3-phase Speed Rated power 
LPC 80/29 G 3 3~ 400 V 2900 1/min 4,2 kW 
LPC 50/47PM G 2 1~ 230 V 3600 1/min 3,68 kW 
LPC 50/47P G 2 1~ 230 V 3600 1/min 3,68 kW 
LPC 50/25M G 2 3~ 400 V 2900 1/min 2,2 kW 
LPC 50/25 G 2 3~ 400 V 2900 1/min 2,2 kW 
LPC 40/27PM G 1 1/2 A 1~ 230 V 3600 1/min 2,21 kW 
LPC 40/27P G 1 1/2 A 1~ 230 V 3600 1/min 2,21 kW 
LPC 40/19M G 1 1/2 A 3~ 400 V 2900 1/min 1,1 kW 
LPC 40/19 G 1 1/2 A 3~ 400 V 2900 1/min 1,1 kW