Homepage | Products | Wilo series A-Z | Wilo-Sub TWU 4-QC
 Search »
Wilo-Sub TWU 4-QC

Submersible motor pump

  • For water supply, irrigation and watering, pressure boosting, reducing the groundwater level or industrial applications
  • For pumping water without long fibrous and abrasive particles from storage tanks or boreholes with a minimum diameter of 4" (= DN 100) and a maximum immersion depth of up to 200 metres
Special features/Product advantages
  • Minor time expenses for extending the motor cable
  • No need to dismantle the pump when extending the cable
  • Integrated non-return device
  • Vertical or horizontal installation possible
Wilo-Sub TWU 4-QC
Technical data

  • Mains connection 1 ~ 230 V, 50 Hz / 3 ~ 400 V, 50 Hz
  • Fluid temperature +3 bis + 30 °C
  • Immersion depth max. 200 m
  • Sand content max. 50 g/m3
  • Water speed min. 8 cm/s
  • Starts per hour , max. 20
  • Protection class IP 58
  • Connections: Pressure line depending on type Rp 1 1/4 or Rp 2
Equipment
  • Fully submersible, multi-stage submersible pump
  • Hydraulics with motor mounted, complete
  • Integrated non-return device
  • Nema coupling
  • QC Quick connection for easy and quick extension of the motor cable
  • Cable length 1.5 m
  • Cable cross-section 4 x 1.5 mm²
  • Single-phase alternating current version 1~230V, 50 Hz inclusive
    • Switchbox with capacitor
    • Thermal motor protection
    • On / Off switch
Description/Design
  • Hydraulics:
    • Multistage submersible motor pump with radial (size 02.. and 04..) or semi-axial (size 08..) impellers in element construction
    • Pressure housing, jacket pipe, stage jacket and strainer in stainless steel
    • Non-return valve installed in pump head
    • All parts in contact with fluid are in corrosion-free materials
  • Motor:
    • Corrosion-free single-phase alternating current or three-phase motor with lacquer insulated windings in hermetically encapsulated stator for direct starting
    • Sealed encapsulated stator, resin impregnated, self-lubricating bearing
    • The motor is cooled by the temperature and flow speed of the fluid outside the motor
Materials
  • Hydraulics:
    • Impellers: plastic
    • Stage housing: stainless steel 1.4301 (AISI 304);
    • Suction housing: stainless steel 1.4301 (AISI 304);
    • Non-return valve: plastic
    • Shaft: stainless steel AISI 430 F
    • Pump housing: stainless steel 1.4301 (AISI 304);
  • Motor:
    • Motor housing: stainless steel 1.4301 (AISI 304);
    • Shaft end: stainless steel 1.4305 (AISI 303)
Scope of delivery
  • Pump ready for connection
  • QC quick connection for motor cable
  • Single-phase AC version include switchbox
  • Installation and operating instructions
Wilo-Sub TWU 4-QC
Dynamic name Name 1-phase / 3-phase Speed Rated power 
TWU 4-0817-QC 3~ Rp 2 3~ 400 V 2850 1/min 3 kW 
TWU 4-0812-QC 3~ Rp 2 3~ 400 V 2850 1/min 2,2 kW 
TWU 4-0804-QC 3~ Rp 2 3~ 400 V 2850 1/min 0,75 kW 
TWU 4-0804-QC 1~ Rp 2 1~ 230 V 2850 1/min 0,75 kW 
TWU 4-0430-QC 3~ Rp 1¼ 3~ 400 V 2850 1/min 2,2 kW 
TWU 4-0420-QC 3~ Rp 1¼ 3~ 400 V 2850 1/min 1,5 kW 
TWU 4-0415-QC 3~ Rp 1¼ 3~ 400 V 2850 1/min 1,1 kW 
TWU 4-0415-QC 1~ Rp 1¼ 1~ 230 V 2850 1/min 1,1 kW 
TWU 4-0410-QC 3~ Rp 1¼ 3~ 400 V 2850 1/min 0,75 kW 
TWU 4-0410-QC 1~ Rp 1¼ 1~ 230 V 2850 1/min 0,75 kW 
TWU 4-0407-QC 3~ Rp 1¼ 3~ 400 V 2850 1/min 0,55 kW 
TWU 4-0407-QC 1~ Rp 1¼ 1~ 230 V 2850 1/min 0,55 kW 
TWU 4-0405-QC 3~ Rp 1¼ 3~ 400 V 2850 1/min 0,37 kW 
TWU 4-0232-QC 3~ Rp 1¼ 3~ 400 V 2850 1/min 1,1 kW 
TWU 4-0232-QC 1~ Rp 1¼ 1~ 230 V 2850 1/min 1,1 kW 
TWU 4-0222-QC 3~ Rp 1¼ 3~ 400 V 2850 1/min 0,75 kW 
TWU 4-0222-QC 1~ Rp 1¼ 1~ 230 V 2850 1/min 0,75 kW 
TWU 4-0216-QC 3~ Rp 1¼ 3~ 400 V 2850 1/min 0,55 kW 
TWU 4-0216-QC 1~ Rp 1¼ 1~ 230 V 2850 1/min 0,55 kW 
TWU 4-0211-QC 3~ Rp 1¼ 3~ 400 V 2850 1/min 0,37 kW 
TWU 4-0211-QC 1~ Rp 1¼ 1~ 230 V 2850 1/min 0,37 kW 
Wilo-Sub TWU 4-QC