Homepage | Products | Wilo series A-Z | Wilo-Drain TP 50... 65
 Search »
Wilo-Drain TP 50... 65

Submersible wastewater pump

  • For pumping coarsely soiled fluids for:
    • House/site drainage
    • Sewage and water management
    • Environmental and wastewater treatment technology
    • Industrial and processing technology
    • High operational safety through a free ball passage of 44 mm
    • Low weight makes it ideal as an emergency/replacement pump
  • Can be used in the following types of installation:
    • stationary wet
    • transportable
Special features/Product advantages
  • Inox & Composite
  • Detachable connection cable
  • Version with Ex protection (depending on type)
  • Wide characteristic range
Wilo-Drain TP 50... 65
Technical data

  • Mains connection 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Absorbed power P
  • Protection class IP 68
  • Max. submersion depth 10 m
  • Fluid temperature 35 °C
  • Cable length 10 m
  • Free ball passage 44 mm
  • Pressure port depending on type DN 50 / DN 65
Equipment
  • ready-to-plug (version A)
  • Motor monitored via temperature (for TP 50 1~230 V and TP 65)
  • Explosion protection (for TP 65 3~400 V)
  • Connection cable 10 m
  • Attached float switch (version A)
  • Capacitor box for 1~230V (for TP 50)
Description/Design
Monobloc submersible wastewater pump for vertical wet sump installation.
  • Inox & Composite
  • Low weight
  • Detachable connection cable
  • Corrosion-resistant
  • Wet sump installation: stationary and transportable
  • Submersible
  • Open single-channel impeller
  • Vortex impeller
  • Motor: three-phase asynchronous motor 3~400 V, 50 Hz or alternating current motor 1~230 V, 50 Hz
  • Motor protection:
    • Alternating current: thermal winding contacts (WSK)
    • Three-phase: Motor protection to be provided on site from 1.1 kW thermal winding contacts (WSK)
  • Motor shaft mounted in permanently lubricated, low maintenance roller bearings
  • Radial shaft sealing ring: through mechanical seal on motor side, independent of direction of rotation and radial shaft sealing ring on the motor side; oil-filled intermediate chamber for cooling and lubrication
  • Hydraulics: either with free flow or single-channel impeller with a free ball passage of 44 mm
Materials
  • Motor housing: 1.4301 (1.4435 on request)
  • Pump housing: polyurethane/polypropylene
  • Impeller: polyurethane/polypropylene
  • Shaft: 1.4435
  • Mechanical seal: SiC/SiC
  • Static seal: NBR
Scope of delivery
  • Pump ready for connection with
    • Three-phase version 3~400 V: 10 m connection cable and free cable end
    • Alternating current version 1~230 V: 10 m connection cable and switchbox (on/off; terminal strip)
  • Installation and operating instructions
Wilo-Drain TP 50... 65
Dynamic name Discharge size 1-phase / 3-phase Speed Rated power 
TP 65 F 98/15 3~ DN 65 3~ 400 V 2900 1/min 1,5 kW 
TP 65 F 98/15 3~ DN 65 3~ 400 V 2900 1/min 1,5 kW 
TP 65 F 91/11 1~ DN 65 1~ 230 V 2900 1/min 1,1 kW 
TP 65 F 91/11 1~ DN 65 1~ 230 V 2900 1/min 1,1 kW 
TP 65 F 91/11 3~ DN 65 3~ 400 V 2900 1/min 1,1 kW 
TP 65 F 91/11 3~ DN 65 3~ 400 V 2900 1/min 1,1 kW 
TP 65 F 91/11 A 1~ DN 65 1~ 230 V 2900 1/min 1,1 kW 
TP 65 F 91/11 A 3~ DN 65 3~ 400 V 2900 1/min 1,1 kW 
TP 65 F 109/22 3~ DN 65 3~ 400 V 2900 1/min 2,2 kW 
TP 65 F 109/22 3~ DN 65 3~ 400 V 2900 1/min 2,2 kW 
TP 65 E 132/22 3~ DN 65 3~ 400 V 2900 1/min 2,2 kW 
TP 65 E 132/22 3~ DN 65 3~ 400 V 2900 1/min 2,2 kW 
TP 65 E 122/15 3~ DN 65 3~ 400 V 2900 1/min 1,5 kW 
TP 65 E 122/15 3~ DN 65 3~ 400 V 2900 1/min 1,5 kW 
TP 65 E 114/11 1~ DN 65 1~ 230 V 2900 1/min 1,1 kW 
TP 65 E 114/11 1~ DN 65 1~ 230 V 2900 1/min 1,1 kW 
TP 65 E 114/11 3~ DN 65 3~ 400 V 2900 1/min 1,1 kW 
TP 65 E 114/11 3~ DN 65 3~ 400 V 2900 1/min 1,1 kW 
TP 65 E 114/11 A 1~ DN 65 1~ 230 V 2900 1/min 1,1 kW 
TP 65 E 114/11 A 3~ DN 65 3~ 400 V 2900 1/min 1,1 kW 
TP 50 F 90/7,5 1~ DN 50 1~ 230 V 2900 1/min 0,75 kW 
TP 50 F 90/7,5 1~ DN 50 1~ 230 V 2900 1/min 0,75 kW 
TP 50 F 90/7,5 3~ DN 50 3~ 400 V 2900 1/min 0,75 kW 
TP 50 F 90/7,5 3~ DN 50 3~ 400 V 2900 1/min 0,75 kW 
TP 50 F 90/7,5 A 1~ DN 50 1~ 230 V 2900 1/min 0,75 kW 
TP 50 F 90/7,5 A 3~ DN 50 3~ 400 V 2900 1/min 0,75 kW 
TP 50 F 82/5,5 1~ DN 50 1~ 230 V 2900 1/min 0,55 kW 
TP 50 F 82/5,5 1~ DN 50 1~ 230 V 2900 1/min 0,55 kW 
TP 50 F 82/5,5 3~ DN 50 3~ 400 V 2900 1/min 0,55 kW 
TP 50 F 82/5,5 3~ DN 50 3~ 400 V 2900 1/min 0,55 kW 
TP 50 F 82/5,5 A 1~ DN 50 1~ 230 V 2900 1/min 0,55 kW 
TP 50 F 82/5,5 A 3~ DN 50 3~ 400 V 2900 1/min 0,55 kW 
TP 50 E 107/7,5 1~ DN 50 1~ 230 V 2900 1/min 0,75 kW 
TP 50 E 107/7,5 1~ DN 50 1~ 230 V 2900 1/min 0,75 kW 
TP 50 E 107/7,5 3~ DN 50 3~ 400 V 2900 1/min 0,75 kW 
TP 50 E 107/7,5 3~ DN 50 3~ 400 V 2900 1/min 0,75 kW 
TP 50 E 107/7,5 A 1~ DN 50 1~ 230 V 2900 1/min 0,75 kW 
TP 50 E 107/7,5 A 3~ DN 50 3~ 400 V 2900 1/min 0,75 kW 
TP 50 E 101/5,5 1~ DN 50 1~ 230 V 2900 1/min 0,55 kW 
TP 50 E 101/5,5 1~ DN 50 1~ 230 V 2900 1/min 0,55 kW 
TP 50 E 101/5,5 3~ DN 50 3~ 400 V 2900 1/min 0,55 kW 
TP 50 E 101/5,5 3~ DN 50 3~ 400 V 2900 1/min 0,55 kW 
TP 50 E 101/5,5 A 1~ DN 50 1~ 230 V 2900 1/min 0,55 kW 
TP 50 E 101/5,5 A 3~ DN 50 3~ 400 V 2900 1/min 0,55 kW