Homepage | Products | Wilo series A-Z | Wilo-TOP-E
 Search »
Wilo-TOP-E

Glandless circulation pump with screwed or flange connection and automatic capacity adjustment

Hot-water heating systems of all kinds and industrial circulation systems
Special features/Product advantages
  • up to 50% power saving compared with heating pumps without control
  • Automatic control function
  • Remote control via infrared interface (IR monitor)
  • Pump communication using plug technology that can be retrofitted without any problem
Wilo-TOP-E
Technical data

  • Permitted temperature range +20 °C to +110 °C
  • Mains connection 1~230 V, 50 Hz
  • Protection class IP 43
  • Nominal width Rp 1 to DN 100
  • Max. operating pressure: Screwed pumps 10 bar; Flanged pumps 6/10 bar or. 6 bar (special version: 10 bar or 16 bar)
Equipment
  • Pre-selectable control modes Δp-c, Δp-v, Δp-T for optimum load adjustment
  • Automatic setback operation for further savings potential
  • Pre-selectable speed for constant duty point
  • "Red button technology" for very easy operation
  • Status display
  • Motor protection, collective fault lamp and contact for collective fault signal
  • Extensible BA interfaces
  • Programming via manual control level or operating and service unit
  • Cataphoretic coated pump housing
  • Combination flange PN 6/PN 10 (DN 40 to DN 65)
  • Thermal insulation shell as standard
Description/Design
  • Glandless circulation pump with integrated automatic capacity adjustment
  • Red button technology and display
  • Motor protection with trip electronics
  • Plug connection for extending the functions, with optional IF modules for building automation (BA)
Materials
  • Pump housing: cataphoretic coated cast iron, also available in red bronze, depending on the type
  • Impeller: plastic
  • Shaft: stainless steel
  • Bearing: metal-impregnated carbon
Scope of delivery
  • Pump
  • Thermal insulation shells
  • including seals for screw thread
  • incl. washers for flange bolts for combination flange connection DN 40 to DN 65
  • Installation and operating instructions
Wilo-TOP-E
Dynamic name Name Nominal size 1-phase / 3-phase Rated power 
TOP-E 80/1-10 LON PN 6 DN 80  PN 6 1~ 230 V 1,1 kW 
TOP-E 80/1-10 LON PN 16 DN 80  PN 16 1~ 230 V 1,1 kW 
TOP-E 80/1-10 LON PN 10 DN 80  PN 16 1~ 230 V 1,1 kW 
TOP-E 65/1-10 LON PN 16 DN 65  PN 16 1~ 230 V 0,57 kW 
TOP-E 65/1-10 LON PN 6/10 DN 65  PN 6/10 1~ 230 V 0,57 kW 
TOP-E 50/1-7 LON PN 16 DN 50  PN 16 1~ 230 V 0,35 kW 
TOP-E 50/1-7 LON PN 6/10 DN 50  PN 6/10 1~ 230 V 0,35 kW 
TOP-E 50/1-6 LON PN 16 DN 50  PN 16 1~ 230 V 0,18 kW 
TOP-E 50/1-6 LON PN 6/10 DN 50  PN 6/10 1~ 230 V 0,18 kW 
TOP-E 50/1-10 LON PN 16 DN 50  PN 16 1~ 230 V 0,45 kW 
TOP-E 50/1-10 LON PN 6/10 DN 50  PN 6/10 1~ 230 V 0,45 kW 
TOP-E 40/1-4 LON PN 6/10 DN 40  PN 6/10 1~ 230 V 0,09 kW 
TOP-E 40/1-10 LON PN 16 DN 40  PN 16 1~ 230 V 0,35 kW 
TOP-E 40/1-10 LON PN 6/10 DN 40  PN 6/10 1~ 230 V 0,35 kW 
TOP-E 30/1-7 LON PN 10 Rp 1¼/G 2  PN 10 1~ 230 V 0,09 kW 
TOP-E 30/1-10 LON PN 16    1~ 230 V 0,18 kW 
TOP-E 30/1-10 LON PN 10 Rp 1¼/G 2  PN 10 1~ 230 V 0,18 kW 
TOP-E 25/1-7 LON PN 10 Rp 1/G 1½  PN 10 1~ 230 V 0,09 kW 
TOP-E 100/1-10 LON PN 6 DN 100  PN 6 1~ 230 V 1,1 kW 
TOP-E 100/1-10 LON PN 16 DN 100  PN 16 1~ 230 V 1,1 kW 
TOP-E 100/1-10 LON PN 10 DN 100  PN 16 1~ 230 V 1,1 kW