zoom »

Submersible wastewater pump with macerator For pumping wastewater with faeces in pressurised drainage systems

• Patented macerator
• High efficiency
• Low operating costs
• Unsusceptible to clogging and blockage
• Highly operational safety
• Corrosion-resistant stainless steel motor in 1.4404 (316 L)

Also for MTS 40 E:

• Double mechanical seal and oil sealing chamber
• Extra-robust motor cable (NSS Hu)

• Mains connection 1~230 V, 50 Hz or 3~400 V, 50 Hz
• Protection class IP 68
• Fluid temperature 3 35 C
• Cable length 10 m

• Monobloc submersible wastewater pump with macerator for vertical wet sump installation
• New type of patented macerator
• Free inlet to impeller
• Internal rotary cutter
• Spherical macerator
• Macerating pumped product
• Drawing cut (scissor cut)

Monobloc submersible waste water pump with macerator for vertical wet sump installation; three-phase asynchronous motor in stainless steel, 3~400 V, 50 Hz or single-phase AC motor in stainless steel, 1~230 V, 50 Hz, protection class IP 68, protected by thermal winding contacts, insulation class F; motor shaft mounted in permanently lubricated roller bearings

• Radial shaft sealing ring
• MTS : mechanical seal on motor side, independent of direction of rotation, shaft seal ring on pump side; oil-filled intermediate chamber for cooling and lubrication
• MTS ... E: mechanical seal on pump and motor side, independent of direction of rotation; oil-filled intermediate chamber for cooling and lubrication

• Hydraulics: closed single-channel impeller (with a free ball passage of 10 mm) in conjunction with patented macerator allows clog-free pumping and optimum efficiency

• Pump housing: ENGJL250
• Impeller: EN-JL200
• Shaft: 1,0570 / 1,4404
• Mechanical seal on pump side (independent of direction of rotation): SiC/SiC
• Shaft seal on motor side: NBR
• Static seal: NBR
• Motor housing: 1.4404 (AISI 316L)
• Macerator: 1.4528

• Pump ready for connection
• Installation and operating instructions