Homepage | Products | Wilo series A-Z | Wilo-Comfort-Vario COR-1 MVIE/GE
 Search »
Wilo-Comfort-Vario COR-1 MVIE/GE

Water supply plants with a non-self-priming high pressure centrifugal pump and integrated speed control

  • Fully automatic water supply in pressure operation from the public water mains or a storage tank
  • Pumping of drinking water, process water, cooling water, fire-fighting or other process water that does not attack the materials used chemically or mechanically and does not contain any abrasive or long fibre particles
Special features/Product advantages
  • robust system through stainless steel high pressure centrifugal pumps, series MVIE, with air-cooled integrated frequency converter
  • Broad hydraulic range through use of all pumps in the MVIE series
  • Extremely wide control bandwidth of the frequency converter
  • Integrated full motor protection via PTC
  • Integrated dry-running detection with automatic de-activation at low water via the performance characteristic of the motor control electronics
Wilo-Comfort-Vario COR-1 MVIE/GE
Technical data

  • Mains connection 3~400 V, 50/60 Hz or depending on type also 1~230V, 50/60Hz
  • Max. fluid temperature. 70 C
  • Operating pressure 16 bar
  • Inlet pressure 10 bar
  • Nominal connection width on suction side Rp 1 1/4 Rp 2
  • Nominal connection width on pressure side Rp 1 1/4 Rp 1 1/2
  • Protection class IP 54
Equipment
  • 1 pump, series MVIE, with IEC standard motor and infinite control via integrated frequency converter
  • all components in contact with fluid are corrosion-resistant
  • Pipework in stainless steel 1.457
  • Shut-off valve on pressure side
  • Non-return valve on pressure side
  • 8 l diaphragm pressure vessel, PN16
  • With motor power 11 to 22 kW, including VR controller
Description/Design
  • Base frame: stainless steel 1.4301 or galvanised steel (MVIE.../VR) equipped with height-adjustable vibration absorbers for extensive structure-borne sound insulation
  • Pipework: complete pipework on pressure side in stainless steel 1.4571, suitable for connecting all the pipe materials used in the building service; the pipework is dimensioned according to the total hydraulic power of the pressure boosting system
  • Pumps: 1 pump in series MVIE 2.., 4.., 8.., 16.., 32.. or 52.. used in each case (up to max. 7.5 kW motor power); the air-cooled frequency converter adapted to the pump motor allows the infinite control of all the pumps in these series between 26 Hz and max. 65 Hz; all the pump components in contact with the fluid are in stainless steel 1.4301
  • Fittings: each pump is equipped on the pressure side with a gearbox ball shut-off valve in CuZn, Ni-coated, with DVGW test mark and a non-return valve, material POM, with DVGW approval mark in the CuZn housing
  • Diaphragm pressure vessel: 8 l/PN 16 provided on the end pressure side with a butyl rubber diaphragm, safe according to the foodstuffs act, for test and inspection purposes provided with a ball shut-off valve in CuZn, Ni-coated, with drain and throughflow valve according to DIN 4807
Materials
  • Impellers stainless steel 1.4301/1.4404
  • Stage chambers stainless steel 1.4301/1.4404
  • Pump housing stainless steel 1.4301/1.4404 or cast iron
  • Shaft stainless steel 1.4057/1.4404
  • Seals EPDM (EP851)/Viton
  • Mechanical seal tungsten carbide/carbon / SiC/carbon
  • Pressure jacket stainless steel 1.4301 / 1.4404
  • Bearing tungsten carbide
  • Pump foot FGL 250/316
Scope of delivery
  • Pressure boosting system ready for connection, assembled at the works, function and leaktightness checked
  • Packing
  • Installation and operating instructions
Wilo-Comfort-Vario COR-1 MVIE/GE
Dynamic name Name Nominal size 1-phase / 3-phase Rated power 
COR-1 MVIE 5202-GE    3~ 400 V 7,5 kW 
COR-1 MVIE 3203-GE DN65  PN 16 3~ 400 V 7,5 kW 
COR-1 MVIE 3202-GE DN65  PN 16 3~ 400 V 5,5 kW 
COR-1 MVIE 1607-6-GE Rp 2  PN 16 3~ 400 V 7,5 kW 
COR-1 MVIE 1605-6-GE Rp 2  PN 16 3~ 400 V 5,5 kW 
COR-1 MVIE 1603-6-2G-GE Rp 2  PN 16 3~ 400 V 4 kW 
COR-1 MVIE 1602-6-2G-GE Rp 2  PN 16 3~ 400 V 2,2 kW 
COR-1 MVIE 808-GE Rp 1½  PN 16 3~ 400 V 5,5 kW 
COR-1 MVIE 806-2G-GE Rp 1½  PN 16 3~ 400 V 4 kW 
COR-1 MVIE 803-2G-GE Rp 1½  PN 16 3~ 400 V 2,2 kW 
COR-1 MVIE 410-2G-GE Rp 1¼  PN 16 3~ 400 V 4 kW 
COR-1 MVIE 406-2G-GE Rp 1¼  PN 16 3~ 400 V 2,2 kW 
COR-1 MVIE 403-2G-GE Rp 1¼  PN 16 3~ 400 V 1,1 kW 
COR-1 MVIE 403 EM-GE Rp 1¼  PN 16 1~ 230 V 1,1 kW 
COR-1 MVIE 208-2G-GE Rp 1¼  PN 16 3~ 400 V 2,2 kW 
COR-1 MVIE 204-2G-GE Rp 1¼  PN 16 3~ 400 V 1,1 kW 
COR-1 MVIE 204 EM-GE Rp 1¼  PN 16 1~ 230 V 1,1 kW